Panasonic HDC-HS9P / HDC-HS9PC / HDC-HS9PL / HDC-HS9E / HDC-HS9EB / HDC-HS9EE / HDC-HS9EG / HDC-HS9EP / HDC-HS9GC / HDC-HS9GK / HDC-HS9GN / HDC-HS9SG Service Manual ▷ View online
21
6.1.
Drive Information Display
1. Set the mode dial “HDD Recording” mode.
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 2 ] Drive Information display.
Operation specifications
Indication contents
• Drive Information display
Display the fall detection frequency of HDD, Frequency that exceeds highest/lowest operation guarantee temperature and serial
number.
number.
Push the menu button to end the service mode, and then POWER OFF.
22
6.2.
Lock Search History Indication
1. Set the mode dial “HDD Recording” mode.
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 4 ] Lock search history indication.
Operation specifications
Indication contents
• Lock search history indication
Display the camera system error cord for three histories saved in EEPROM.
• The error cord contents which are displayed
Lock search history indication is finished by POWER OFF.
Error code
Function
51
Focus control is abnormal
52
Zoom control is abnormal
53
OIS lens control is abnormal
71
Lens cover open/close is abnormal
72
Cooling fan is abnormal
73
High temperature is abnormal
33
Communication between camera to ARM is abnormal
23
6.3.
HDD Self Check
1. Set the mode dial “HDD Recording” mode.
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 10 ] HDD self check.
Operation specifications
Indication contents
• HDD self check result display
Display the HDD self check result information.
Displays other than “OK” are abnormalities of HDD.
Displays other than “OK” are abnormalities of HDD.
Push the menu button to end the service mode, and then POWER OFF.
24
6.4.
HDD Hardware Test
1. Set the mode dial “HDD Recording” mode.
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 14 ] HDD hardware test.
Operation specifications
Indication contents
• HDD hardware test display
Display the HDD hardware test result information.
• The error cord contents which are displayed
Push the menu button to end the service mode, and then POWER OFF.
Error code
Function
NO ERROR
It is normal without the error
CTR ERROR
Controller Resistor Error
BUFF RAM ERROR
Buffer RAM Error
ECC DEV ERROR
ECC device Error
CPU ERROR
CPU RAM/ROM Error
COMMAND
Reserved
Click on the first or last page to see other HDC-HS9P / HDC-HS9PC / HDC-HS9PL / HDC-HS9E / HDC-HS9EB / HDC-HS9EE / HDC-HS9EG / HDC-HS9EP / HDC-HS9GC / HDC-HS9GK / HDC-HS9GN / HDC-HS9SG service manuals if exist.