HDC-HS900P, HDC-HS900PC, HDC-HS900PU, HDC-HS900EB, HDC-HS900EEK, HDC-HS900EG, HDC-HS900EP, HDC-HS900GC, HDC-HS900GN, HDC-HS900GT, HDC-HS900GK — Panasonic Movie Service Manual (repair manual)

Model
HDC-HS900P HDC-HS900PC HDC-HS900PU HDC-HS900EB HDC-HS900EEK HDC-HS900EG HDC-HS900EP HDC-HS900GC HDC-HS900GN HDC-HS900GT HDC-HS900GK
Pages
101
Size
8.29 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / HIGH DEFINITION VIDEO CAMERA
File
hdc-hs900p-hdc-hs900pc-hdc-hs900pu-hdc-hs900eb-hdc.pdf
Date

View Panasonic HDC-HS900P / HDC-HS900PC / HDC-HS900PU / HDC-HS900EB / HDC-HS900EEK / HDC-HS900EG / HDC-HS900EP / HDC-HS900GC / HDC-HS900GN / HDC-HS900GT / HDC-HS900GK Service Manual online

ORDER NO. VM1102007CE
B27
High Definition Video Camera
Model No.
HDC-HS900P
HDC-HS900PC
HDC-HS900PU
HDC-HS900EB
HDC-HS900EE
HDC-HS900EG
HDC-HS900EP
HDC-HS900GC
HDC-HS900GN
HDC-HS900GT
HDC-HS900GK
Vol. 1
Colour
(K)...........Black Type
2
TABLE OF CONTENTS
PAGE
PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.) --------3
1.4. How to Discharge the Capacitor on Flash SD
P.C.B.----------------------------------------------------------4
2 Warning --------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord (For EB/GC) ---------------------6
2.4. How to Replace the Lithium Battery -------------------7
3 Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------8
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
3.5. Precautions for Handling HDD------------------------ 10
3.6. Formatting-------------------------------------------------- 14
4 Specifications ---------------------------------------------------- 15
5 Location of Controls and Components------------------ 18
6 Service Mode ----------------------------------------------------- 22
6.1. Drive Information Display ------------------------------ 23
6.2. HDD Self Check Execution ---------------------------- 23
6.3. Lock Search History Indication ----------------------- 24
6.4. Power ON Self Check Result Display--------------- 24
6.5. HDD Hardware Test ------------------------------------- 25
6.6. Forced full flash emission ------------------------------ 25
6.7. Erasing the lock histories ------------------------------ 26
6.8. Erasing the internal media management
information ------------------------------------------------ 26
6.9. Camera data indications while the video
playback ---------------------------------------------------- 27
7 Service Fixture & Tools --------------------------------------- 28
7.1. When Replacing the Main P.C.B. -------------------- 28
7.2. Service Position ------------------------------------------ 28
8 Disassembly and Assembly Instructions --------------- 30
8.1. Disassembly Flow Chart for the Unit ---------------- 30
8.2. PCB Location---------------------------------------------- 30
8.3. Disassembly Procedure for the Unit  ---------------- 31
9 Measurements and Adjustments -------------------------- 53
9.1. Electric Adjustment -------------------------------------- 53
10 Factory Setting--------------------------------------------------- 55
10.1. How To Turn On The Factory Settings? ------------ 55
10.2. What Is The Factory Settings? ----------------------- 56
3
1 Safety Precautions
1.1.
General Guidelines
1. IMPORTANT SAFETY NOTICE
There are special components used in this equipment
which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Layout,
Exploded Views and Replacement Parts List. It is essen-
tial that these critical parts should be replaced with manu-
facturer’s specified parts to prevent X-RADIATION,
shock, fire, or other hazards. Do not modify the original
design without permission of manufacturer.
2. An Isolation Transformer should always be used during
the servicing of AC Adaptor whose chassis is not isolated
from the AC power line. Use a transformer of adequate
power rating as this protects the technician from acci-
dents resulting in personal injury from electrical shocks. It
will also protect AC Adaptor from being damaged by acci-
dental shorting that may occur during servicing.
3. When servicing, observe the original lead dress. If a short
circuit is found, replace all parts which have been over-
heated or damaged by the short circuit.
4. After servicing, see to it that all the protective devices
such as insulation barriers, insulation papers shields are
properly installed.
5. After servicing, make the following leakage current
checks to prevent the customer from being exposed to
shock hazards.
1.2.
Leakage Current Cold Check
1. Unplug the AC cord and connect a jumper between the
two prongs on the plug.
2. Measure the resistance value, with an ohmmeter,
between the jumpered AC plug and each exposed metal-
lic cabinet part on the equipment such as screwheads,
connectors, control shafts, etc. When the exposed metal-
lic part has a return path to the chassis, the reading
should be between 1 M
Ω and 5.2 MΩ. When the exposed
metal does not have a return path to the chassis, the
reading must be infinity.
1.3.
Leakage Current Hot Check
(See Figure 1.)
1. Plug the AC cord directly into the AC outlet. Do not use
an isolation transformer for this check.
2. Connect a 1.5 k
Ω, 10 W resistor, in parallel with a 0.15 μF
capacitor, between each exposed metallic part on the set
and a good earth ground, as shown in Figure 1.
3. Use an AC voltmeter, with 1 k
Ω/V or more sensitivity, to
measure the potential across the resistor.
4. Check each exposed metallic part, and measure the volt-
age at each point.
5. Reverse the AC plug in the AC outlet and repeat each of
the above measurements.
6. The potential at any point should not exceed 0.75 V RMS.
A leakage current tester (Simpson Model 229 or equiva-
lent) may be used to make the hot checks, leakage cur-
rent must not exceed 1/2 mA. In case a measurement is
outside of the limits specified, there is a possibility of a
shock hazard, and the equipment should be repaired and
rechecked before it is returned to the customer.
Figure. 1
4
1.4.
How to Discharge the Capacitor on Flash SD P.C.B.
CAUTION:
1. Be sure to discharge the capacitor on FLASH SD P.C.B..
2. Be careful of the high voltage circuit on FLASH SD P.C.B. when servicing.
Before disassembling, perform "6.6. Forced full flash emission" for discharging capacitor.
The capacitor also can be discharged according to the following procedures.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on FLASH SD P.C.B. for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Page of 101

Download Panasonic HDC-HS900P / HDC-HS900PC / HDC-HS900PU / HDC-HS900EB / HDC-HS900EEK / HDC-HS900EG / HDC-HS900EP / HDC-HS900GC / HDC-HS900GN / HDC-HS900GT / HDC-HS900GK Service Manual (Repair Manual)

Here you can view online or download Panasonic HDC-HS900P / HDC-HS900PC / HDC-HS900PU / HDC-HS900EB / HDC-HS900EEK / HDC-HS900EG / HDC-HS900EP / HDC-HS900GC / HDC-HS900GN / HDC-HS900GT / HDC-HS900GK Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Panasonic HDC-HS900P / HDC-HS900PC / HDC-HS900PU / HDC-HS900EB / HDC-HS900EEK / HDC-HS900EG / HDC-HS900EP / HDC-HS900GC / HDC-HS900GN / HDC-HS900GT / HDC-HS900GK Movie. Information contained in Panasonic HDC-HS900P / HDC-HS900PC / HDC-HS900PU / HDC-HS900EB / HDC-HS900EEK / HDC-HS900EG / HDC-HS900EP / HDC-HS900GC / HDC-HS900GN / HDC-HS900GT / HDC-HS900GK service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).