Panasonic HDC-HS900P / HDC-HS900PC / HDC-HS900PU / HDC-HS900EB / HDC-HS900EEK / HDC-HS900EG / HDC-HS900EP / HDC-HS900GC / HDC-HS900GN / HDC-HS900GT / HDC-HS900GK Service Manual ▷ View online
53
9 Measurements and Adjustments
9.1.
Electric Adjustment
• Adjustment method is different from a conventional High definition video camera.
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
9.1.1.
Adjustment Procedure
• Connect the main unit to PC with USB.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
Figure of connection
Figure of image when adjustment
Part Number of jig
• Only a necessary jig mentions it in setup of electric adjustment.
No.
Part Name
Part Number
Remarks
1
PC
------
2
AC Adaptor
------
3
USB Cable
------
4
46mm Step Up Ring
VFK1164TAR46
5
Adjustment Software (Tatsujin)
------
54
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
55
10 Factory Setting
10.1. How To Turn On The Factory Settings?
1. Set the mode switch “Motion Picture Recording” mode.
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed or “ESD NODATA” as “NG” is displayed on LCD monitor. Cutting of battery connection
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed or “ESD NODATA” as “NG” is displayed on LCD monitor. Cutting of battery connection
or AC power supply connection as a completion of the “FACTORY SETTINGS”.
(After use at least once, even if the physical format of the build-in memory will be performed, “ESD NODATA” as “NG” is indi-
cated, but “FACTORY SETTINGS” is completed.)
(After use at least once, even if the physical format of the build-in memory will be performed, “ESD NODATA” as “NG” is indi-
cated, but “FACTORY SETTINGS” is completed.)
56
10.2. What Is The Factory Settings?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
If the "Factory Settings" is completed, physical format of the build-in memory is not performed, execute physical format according to
the following procedure.
the following procedure.
The setting position of factory settings:
Name
Setting position
Mode switch
Motion picture recording mode
Click on the first or last page to see other HDC-HS900P / HDC-HS900PC / HDC-HS900PU / HDC-HS900EB / HDC-HS900EEK / HDC-HS900EG / HDC-HS900EP / HDC-HS900GC / HDC-HS900GN / HDC-HS900GT / HDC-HS900GK service manuals if exist.