Panasonic HDC-HS80P / HDC-HS80PC / HDC-HS80PU / HDC-HS80EB / HDC-HS80EC / HDC-HS80EE / HDC-HS80EG / HDC-HS80EP / HDC-HS80GA / HDC-HS80GC / HDC-HS80GN / HDC-HS80GT / HDC-HS80GK / HDC-HS80EE9K Service Manual ▷ View online
21
6.1.
Drive Information Display
Touch the [ 2 ] of LCD, select Drive Information display.
Operation specifications
Operation specifications
Indication contents
• Drive Information display
Display the fall detection frequency of HDD, Frequency that exceeds highest/lowest operation guarantee temperature and serial
number.
number.
Touch the [ BAK ] of LCD to end the service mode, and then POWER OFF.
6.2.
HDD Self Check Execution
Touch the [ 3 ] of LCD, select HDD self check execution.
Operation specifications
Operation specifications
Indication contents
• HDD self check execution
Display the HDD self check result information.
Displays other than “OK” are abnormalities of HDD.
Displays other than “OK” are abnormalities of HDD.
Touch the [ BAK ] of LCD to end the service mode, and then POWER OFF.
22
6.3.
Lock Search History Indication
Touch the [ 4 ] of LCD, select Lock search history indication.
Operation specifications
Operation specifications
Indication contents
• Lock search history indication
Display the camera system error cord for three histories saved in EEPROM.
• The error cord contents which are displayed
Cutting of battery connection or AC power supply connection to end the service mode.
6.4.
Power ON Self Check Result Display
Touch the [ 5 ] of LCD, select Power ON self check result display.
Operation specifications
Operation specifications
Indication contents
• Power ON self check result display
Function to diagnose correct function of the device and interface between devices result display.
Display the following commnucation test result.
- CAM-PWR : Commnucation test between IC2006 to IC1503
- CAM-UNI : Commnucation test between IC2006 to IC3401
- CAM-UNI : Commnucation test between IC2006 to IC3401
Display other than “OK” are abnomalities of each lines.
Cutting of battery connection or AC power supply connection to end the service mode.
Error code
Function
51
Focus control is abnormal
52
Zoom control is abnormal
53
OIS lens control is abnormal
71
Lens cover open/close is abnormal
73
High temperature is abnormal
33
Communication between IC2006 to IC3401 is abnormal
23
6.5.
HDD Hardware Test
Touch the [ 6 ] of LCD, select HDD hardware test.
Operation specifications
Operation specifications
Indication contents
• HDD hardware test
Display the HDD hardware test result information.
• The error cord contents which are displayed
In the above table, displays other than “NO ERROR” are abnormalities of HDD.
Cutting of battery connection or AC power supply connection to end the service mode.
6.6.
Erasing the lock histories
Touch the [ 10 ] of LCD, select erasing the lock histories execution.
Operation specifications
Operation specifications
Indication contents
• Erasing the error histories stored in EEPROM. (working time is not erased)
Press the power button and turn off.
Error code
Function
NO ERROR
It is normal without the error
CTR ERROR
Controller Resistor Error
BUFF RAM ERROR
Buffer RAM Error
ECC DEV ERROR
ECC device Error
CPU ERROR
CPU RAM/ROM Error
COMMAND ERROR
Reserved
24
6.7.
Erasing the internal media management information
Touch the [ 11 ] of LCD, select erasing the internal media management information for fast boot stored in flash memory.
Operation specifications
Operation specifications
Indication contents
• The fast boot management informations of the internal media are stored in the flash memory.
The following cases, be sure to implement for protection of customer's recorded data.
However, if there is no problem to delete customer's recorded data, erasing the internal media management information is not
required.
However, if there is no problem to delete customer's recorded data, erasing the internal media management information is not
required.
• Case1:
When replacing the flash memory chip (IC3402) or replacing the MAIN P.C.B. Unit.
Before checking the operations after replacing the parts, erasing the internal media management information.
Before checking the operations after replacing the parts, erasing the internal media management information.
• Case2:
When replacing the HDD Unit.
Before replacing the HDD Unit, erasing the internal media management information. then replace it new one.
Before replacing the HDD Unit, erasing the internal media management information. then replace it new one.
CAUTION:
When turning the unit on after performing the above operation, the internal media management information is stored into the unit,
the playback of the recorded data is normally.
the playback of the recorded data is normally.
When not performing the above operation, the customer's recorded data will disappear.
Press the power button and turn off.
Click on the first or last page to see other HDC-HS80P / HDC-HS80PC / HDC-HS80PU / HDC-HS80EB / HDC-HS80EC / HDC-HS80EE / HDC-HS80EG / HDC-HS80EP / HDC-HS80GA / HDC-HS80GC / HDC-HS80GN / HDC-HS80GT / HDC-HS80GK / HDC-HS80EE9K service manuals if exist.