Panasonic HDC-HS300P / HDC-HS300PC / HDC-HS300EB / HDC-HS300EC / HDC-HS300EE / HDC-HS300EF / HDC-HS300EG / HDC-HS300EP / HDC-HS300GC / HDC-HS300GK / HDC-HS300GT / HDC-HS300SG / HDC-HS300EEK Service Manual ▷ View online
49
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
50
9 Factory Setting
9.1.
HOW TO TURN ON THE FACTORY SETTINGS?
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
completion of the “FACTORY SETTINGS”.
51
9.2.
WHAT IS THE FACTORY SETTINGS?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
8. Confirm the data area of HDD is cleared.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
8. Confirm the data area of HDD is cleared.
(When recorded data in HDD, "error display" is done)
If "error display" is done, execute physical format according to the following procedure.
If "error display" is done, execute physical format according to the following procedure.
The setting position of factory settings:
Name
Setting position
Mode dial
OFF
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Block Diagram .......................................................................... S-2
S2.1. Overall Block Diagram .......................................................... S-2
S2.1. Overall Block Diagram .......................................................... S-2
S3. Schematic Diagram .................................................................. S-3
S3.1. Interconnection Diagram ....................................................... S-3
S3.2. Side R Schematic Diagram ................................................... S-4
S3.3. LCD Schematic Diagram....................................................... S-5
S3.4. Monitor Schematic Diagram .................................................. S-6
S3.5. TPANEL Schematic Diagram ................................................ S-7
S3.6. Side L Schematic Diagram .................................................... S-8
S3.7. EVF B/L Schematic Diagram ................................................ S-9
S3.8. Front Schematic Diagram ................................................... S-10
S3.9. MOS FPC Schematic Diagram ........................................... S-14
S3.10. CAM FUNC OP FPC Schematic Diagram ........................ S-15
S3.11. Power FPC Schematic Diagram ........................................ S-15
S3.12. Main Sub Schematic Diagram........................................... S-16
S3.13. Side R FPC Schematic Diagram ....................................... S-17
S3.1. Interconnection Diagram ....................................................... S-3
S3.2. Side R Schematic Diagram ................................................... S-4
S3.3. LCD Schematic Diagram....................................................... S-5
S3.4. Monitor Schematic Diagram .................................................. S-6
S3.5. TPANEL Schematic Diagram ................................................ S-7
S3.6. Side L Schematic Diagram .................................................... S-8
S3.7. EVF B/L Schematic Diagram ................................................ S-9
S3.8. Front Schematic Diagram ................................................... S-10
S3.9. MOS FPC Schematic Diagram ........................................... S-14
S3.10. CAM FUNC OP FPC Schematic Diagram ........................ S-15
S3.11. Power FPC Schematic Diagram ........................................ S-15
S3.12. Main Sub Schematic Diagram........................................... S-16
S3.13. Side R FPC Schematic Diagram ....................................... S-17
S3.14. LCD OP FPC Schematic Diagram .................................... S-18
S3.15. EVF FPC Schematic Diagram........................................... S-18
S3.16. MF Sensor FPC Schematic Diagram ................................ S-19
S3.17. HDD FPC Schematic Diagram .......................................... S-19
S3.18. Front FPC Schematic Diagram ......................................... S-20
S3.15. EVF FPC Schematic Diagram........................................... S-18
S3.16. MF Sensor FPC Schematic Diagram ................................ S-19
S3.17. HDD FPC Schematic Diagram .......................................... S-19
S3.18. Front FPC Schematic Diagram ......................................... S-20
S4. Print Circuit Board .................................................................. S-21
S4.1. Side R P.C.B. ...................................................................... S-21
S4.2. Monitor P.C.B. ..................................................................... S-22
S4.2.1. Monitor P.C.B. (Component Side) .................................... S-22
S4.2.2. Monitor P.C.B. (Foil Side) ................................................. S-23
S4.3. Side L P.C.B. ....................................................................... S-24
S4.4. EVF B/L P.C.B. .................................................................... S-25
S4.5. Front P.C.B. ......................................................................... S-26
S4.6. MOS FPC P.C.B. ................................................................. S-27
S4.7. CAM FUNC OP FPC P.C.B. ................................................ S-28
S4.8. Power FPC P.C.B. ............................................................... S-29
S4.9. Main Sub P.C.B. .................................................................. S-30
S4.10. Side R FPC P.C.B. ............................................................ S-31
S4.11. LCD OP FPC P.C.B. .......................................................... S-32
S4.1. Side R P.C.B. ...................................................................... S-21
S4.2. Monitor P.C.B. ..................................................................... S-22
S4.2.1. Monitor P.C.B. (Component Side) .................................... S-22
S4.2.2. Monitor P.C.B. (Foil Side) ................................................. S-23
S4.3. Side L P.C.B. ....................................................................... S-24
S4.4. EVF B/L P.C.B. .................................................................... S-25
S4.5. Front P.C.B. ......................................................................... S-26
S4.6. MOS FPC P.C.B. ................................................................. S-27
S4.7. CAM FUNC OP FPC P.C.B. ................................................ S-28
S4.8. Power FPC P.C.B. ............................................................... S-29
S4.9. Main Sub P.C.B. .................................................................. S-30
S4.10. Side R FPC P.C.B. ............................................................ S-31
S4.11. LCD OP FPC P.C.B. .......................................................... S-32
S4.12. EVF FPC P.C.B. ................................................................ S-33
S4.13. MF Sensor FPC P.C.B. ..................................................... S-34
S4.14. HDD FPC P.C.B. ............................................................... S-35
S4.14.1. HDD FPC P.C.B. (Component Side) .............................. S-35
S4.14.2. HDD FPC P.C.B. (Foil Side) ........................................... S-36
S4.15. Front FPC P.C.B. ............................................................... S-37
S4.13. MF Sensor FPC P.C.B. ..................................................... S-34
S4.14. HDD FPC P.C.B. ............................................................... S-35
S4.14.1. HDD FPC P.C.B. (Component Side) .............................. S-35
S4.14.2. HDD FPC P.C.B. (Foil Side) ........................................... S-36
S4.15. Front FPC P.C.B. ............................................................... S-37
S5. Replacement Parts List .......................................................... S-39
S6. Exploded View ....................................................................... S-49
S6.1. Frame and Casing Section (1). ........................................... S-49
S6.2. Frame and Casing Section (2) ............................................ S-50
S6.3. EVF Section. ....................................................................... S-51
S6.4. LCD Section ........................................................................ S-52
S6.5. Camera Lens Section.......................................................... S-53
S6.6. Packing Parts and Accessories Section. ............................. S-54
S6.1. Frame and Casing Section (1). ........................................... S-49
S6.2. Frame and Casing Section (2) ............................................ S-50
S6.3. EVF Section. ....................................................................... S-51
S6.4. LCD Section ........................................................................ S-52
S6.5. Camera Lens Section.......................................................... S-53
S6.6. Packing Parts and Accessories Section. ............................. S-54
Table of contents
Service Manual
VM0902007CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (only GC)
Colour
(K)...........Black Type
Model No.
HDC-HS300EB
HDC-HS300EC
HDC-HS300EE
HDC-HS300EF
HDC-HS300EG
HDC-HS300EP
HDC-HS300EB
HDC-HS300EC
HDC-HS300EE
HDC-HS300EF
HDC-HS300EG
HDC-HS300EP
HDC-HS300GC
HDC-HS300GK
HDC-HS300GT
HDC-HS300P
HDC-HS300PC
HDC-HS300SG
HDC-HS300GK
HDC-HS300GT
HDC-HS300P
HDC-HS300PC
HDC-HS300SG
High Definition Video Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
Click on the first or last page to see other HDC-HS300P / HDC-HS300PC / HDC-HS300EB / HDC-HS300EC / HDC-HS300EE / HDC-HS300EF / HDC-HS300EG / HDC-HS300EP / HDC-HS300GC / HDC-HS300GK / HDC-HS300GT / HDC-HS300SG / HDC-HS300EEK service manuals if exist.