Panasonic HDC-HS250P / HDC-HS250PC / HDC-HS250PU / HDC-HS200EB / HDC-HS200EC / HDC-HS200EE / HDC-HS200EG / HDC-HS200EP / HDC-HS200GC / HDC-HS200GJ / HDC-HS200GK / HDC-HS200GN / HDC-HS200GT / HDC-HS200SG / HDC-HS200EEK (serv.man3) Service Manual ▷ View online
25
6.2.
HDD Self Check Execution
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
screen of the Service Mode Menu being displayed.
3. Touch the [ 3 ] of LCD, select HDD self check execution.
Operation specifications
Indication contents
• HDD self check execution
Display the HDD self check result information.
Displays other than “OK” are abnormalities of HDD.
Displays other than “OK” are abnormalities of HDD.
Push the menu button to end the service mode, and then POWER OFF.
26
6.3.
Lock Search History Indication
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
screen of the Service Mode Menu being displayed.
3. Touch the [ 4 ] of LCD, select Lock search history indication.
Operation specifications
Indication contents
• Lock search history indication
Display the camera system error cord for three histories saved in EEPROM.
• The error cord contents which are displayed
Lock search history indication is finished by POWER OFF.
Error code
Function
51
Focus control is abnormal
52
Zoom control is abnormal
53
OIS lens control is abnormal
71
Lens cover open/close is abnormal
72
Cooling fan is abnormal
73
High temperature is abnormal
33
Communication between camera to ARM is abnormal
27
6.4.
Power ON Self Check Result Display
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
screen of the Service Mode Menu being displayed.
3. Touch the [ 5 ] of LCD, select Power ON self check result display.
Operation specifications
Indication contents
• Power ON self check result display
Function to diagnose correct function of the device and interface between devices result display.
Display the following commnucation test result.
- CAM-PWR : Commnucation test between IC2006 to IC301
- CAM-UNI : Commnucation test between IC3400 to IC301
- CAM-UNI : Commnucation test between IC3400 to IC301
Display other than “OK” are abnomalities of each lines.
Push the menu button to end the service mode, and then POWER OFF.
28
6.5.
HDD Hardware Test
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top
screen of the Service Mode Menu being displayed.
3. Touch the [ 6 ] of LCD, select HDD hardware test.
Operation specifications
Indication contents
• HDD hardware test
Display the HDD hardware test result information.
• The error cord contents which are displayed
In the above table, displays other than “NO ERROR” are abnormalities of HDD.
Push the menu button to end the service mode, and then POWER OFF.
Push the menu button to end the service mode, and then POWER OFF.
Error code
Function
NO ERROR
It is normal without the error
CTR ERROR
Controller Resistor Error
BUFF RAM ERROR
Buffer RAM Error
ECC DEV ERROR
ECC device Error
CPU ERROR
CPU RAM/ROM Error
COMMAND ERROR
Reserved
Click on the first or last page to see other HDC-HS250P / HDC-HS250PC / HDC-HS250PU / HDC-HS200EB / HDC-HS200EC / HDC-HS200EE / HDC-HS200EG / HDC-HS200EP / HDC-HS200GC / HDC-HS200GJ / HDC-HS200GK / HDC-HS200GN / HDC-HS200GT / HDC-HS200SG / HDC-HS200EEK (serv.man3) service manuals if exist.