Panasonic SD-2510WTS Service Manual ▷ View online
33
6.5.
Heater case base assy
1. Remove a lead wire off the hook of angle.
2. Remove the 4 screws and detach the heater case base
assy.
3. Remove the heater case unit from the angle.
4. Remove an angle and screw one off the frame of insulator
and exclude Angle.
Tips on assembly
• Set the positioning marks across from each other on the
heater case side and on heater case base side.
34
6.6.
Motor assy
1. Remove 4 screws and detach the motor assy.
6.7.
Heater case and frame of insulator
1. Remove an angle and screw one off the frame of insulator
and exclude Angle.
35
6.8.
Temperature fuse
1. Remove screw/nut of the frame of insulator, and change a
themal fuse.
6.9.
Sensor
1. Remove screw/nut off the heater case unit and change a
sensor assy.
36
6.10. Heater
1. Remove a ground wire A assy of the heater.
2. Take the 3 claws off from the heater insulator at the out-
side of the heater case unit.
3. Remove the screw and hexagon nut fixing heater insula-
tor A.
4. Remove 6 screws on the heater case.
Click on the first or last page to see other SD-2510WTS service manuals if exist.