Panasonic NC-ZA1HTQ Service Manual ▷ View online
45
• A motor is removed from a duct.
6.3.9.
brewer motor
• Grinder is removed.
• A top chassis fixing screw (6) is removed.
• Cover outside carries out.
• A screw (2) is removed and gear fixed bar is removed.
• A top chassis fixing screw (6) is removed.
• Cover outside carries out.
• A screw (2) is removed and gear fixed bar is removed.
• A belt is removed.
* A belt is exchangeable.
• A fixing screw (1) is removed and a rotation detection board
is removed.
* A connector is removed and substrates can be exchanged.
* A connector is removed and substrates can be exchanged.
• A brewer motor fixing screw (4) is removed floating a little
top chassis.
46
• As brewer motor is pushed in, it takes out from a main part.
• The connector linked to brewer motor is removed.
6.3.10.
Brewer unit Detection microswitch
• A top chassis fixing screw (6) is removed.
• Cover outside carries out.
• A fixing screw (2) is removed and a connection part is
• Cover outside carries out.
• A fixing screw (2) is removed and a connection part is
removed.
• A Brewer unit detection microswitch is removed from a fixed
hook, floating a little top chassis.
• A connection lead is removed.
6.3.11.
Power supply board unit
• A rear cover is removed from a hook.
• The bunch and substrate of a lead are pulled out.
47
• The connected connector is removed and a substrate is
removed.
6.3.12.
Power cord
• A power supply board unit is taken out.
• A connection place (three places) is cut.
• A fixing screw (2) is removed and power cords are
• A connection place (three places) is cut.
• A fixing screw (2) is removed and power cords are
exchanged.
• Please connect with the original lead certainly at the time of
re-connection.
48
7 Maintenance
7.1.
The connection diagram of a tube
Click on the first or last page to see other NC-ZA1HTQ service manuals if exist.