Panasonic NC-ZA1HTQ Service Manual ▷ View online
41
12. Take out the heater package and remove 3 cross slot screw on each frame..
13. heating element can be replaced separate
42
14. Unscrew 2 cross slot screws on coffee - heater and remove the steel sheet.
Unscrew 2 cross slot screws on steam - heater and remove the steel sheet.
15. For replacing the Thermo controller (coffee or steam) pull back cross the heating isolation..
If fitting the new Thermo controller it is important that the new NTC also is enclosed by heat transfer paste. .
43
16. Pull out on one side the connecting (only one side possi-
ble).
17. Straight the thermofuse and pull only the tube into the
heater isolation
18. Cut one connection between wire isolation (blue) and
crimping.
19. Pull back the fuse out of heating isolation part and the
tube pull back untill you can cut the 2. connection.
20. Strip the wire for 8mm and connect with the new thermo-
fuse.
Attention: it is not aloud to solder the connections on ther-
mofuse
Use qualified crimp terminals only.
mofuse
Use qualified crimp terminals only.
6.3.6.
Door opening-and-closing switch
• cable tie of a ferrite core is cut.
• The nail which is fixing the switch is extended and a switch is
44
removed.
• The lead of connection is removed and switches are
exchanged.
6.3.7.
Front door
• Outside is temporarily carried out for the front panel.
• A motor is removed.
• The connector of front door connection is removed from a
• A motor is removed.
• The connector of front door connection is removed from a
LCD display board.
• The hinge axis of a door is extracted.
• A door is opened and removed.
• A door is opened and removed.
6.3.8.
Fanmotor
• front door is removed.
• A motor is removed.
• A top chassis fixing screw (6) is removed.
• The connector of Fanmotor connection is removed from a
• A motor is removed.
• A top chassis fixing screw (6) is removed.
• The connector of Fanmotor connection is removed from a
LCD display board.
• It carries out top chassis few, it floats, a motor unit is
removed, and a lead is extracted.
Click on the first or last page to see other NC-ZA1HTQ service manuals if exist.