Panasonic MK-G38PR Service Manual ▷ View online
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0401000000.html
4.1 SYMPTOM : A.C. motor interrupted
when feeding meat (overloaded).
when feeding meat (overloaded).
TOP
PREVIOUS
NEXT
Causes
Remedy
Too hard meat being fed.
Take out the hard meat.
Too much meat being fed at once Reduce the meat feed rate.
Used for too long continuously.
Follow the specified operating time.
Circuit breaker activated.
Switch off and on again to reset the breaker.
TOP
PREVIOUS
NEXT
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0401000000.html [05.01.2003 15:02:51]
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0402000000.html
4.2 SYMPTOM : Switch turned on, but
A.C. motor failure to start.
A.C. motor failure to start.
TOP
PREVIOUS
NEXT
Causes
Remedy
Power cord broken.
Replace the power cord.
Lead wire terminal in poor contact. Repair or replace the lead wire terminal.
Switch in poor contact.
Replace the switch.
Carbon brush worn out.
Replace the carbon brush.
A.C. motor coil broken.
Replace the A.C. motor.
TOP
PREVIOUS
NEXT
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0402000000.html [05.01.2003 15:02:53]
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0403000000.html
4.3 SYMPTOM : A.C. motor running, but
feed screw failure to turn.
feed screw failure to turn.
TOP
PREVIOUS
NEXT
Causes
Remedy
Gears worn out.
Replace the gears.
Gears damaged.
Replace the gears.
Feed screw worn out. Replace the feed screw.
Feed screw damaged. Replace the feed screw.
TOP
PREVIOUS
NEXT
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0403000000.html [05.01.2003 15:02:54]
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0404000000.html
4.4 SYMPTOM : A.C. motor running too
noisy and meat grinding too slow.
noisy and meat grinding too slow.
TOP
PREVIOUS
NEXT
Causes
Remedy
Carbon brush worn out.
Replace the carbon brush.
Gears worn out or damaged.
Replace the gears.
Cutting blade or cutting plate worn out. Replace the cutting blade or cutting plate.
TOP
PREVIOUS
NEXT
file:///C|/Documents%20and%20Settings/My%20Documents/panasonic/s0404000000.html [05.01.2003 15:02:55]
Click on the first or last page to see other MK-G38PR service manuals if exist.