DOWNLOAD Panasonic ES-RW30 (serv.man2) Service Manual ↓ Size: 494.72 KB | Pages: 12 in PDF or view online for FREE

5

4. To remove the trimmer driving bar, press bars outward.

5. Unfasten a screw and remove the bottom cover.

6. To remove the side panels, insert a small slotted screw-

driver into the middle of housing and unhook.
NOTE:

Unhook the rear side, front side and upper side of side
panel in order.

6

7. To remove the front panel, inset a slotted screwdriver into

the space.

8. Remove the two housing clips, and unfasten six screws

on both front and back side of housing.

9. Take out the housing B.

7

10. Take out the battery assembly from housing A.

11. Remove the tube holder and motor assembly.

8

Make sure whether there is NO foreign substance sticking around a part covered with water seal.

1. Motor

Insert the tube into the projection of the housing A and set
the tube holder firmly.  Then put the float springs into the
projections of housing A, and hook the linear motor
assembly.

2. Battery Case

Align the projection of switch select button on housing A
with the groove of switch plate onbattery case.
Make sure to attach the washer and O-ring into the bat-
tery and lever.