Panasonic ES-RW30 (serv.man2) Service Manual ▷ View online
Order Number SD0907E65CE
Rechargeable Shaver
Model No.
ES-RW30
Europe
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Wiring Connection Diagram ---------------------------------- 9
6 Schematic Diagram ---------------------------------------------- 9
7 Exploded View and Replacement Parts List -----------10
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Wiring Connection Diagram ---------------------------------- 9
6 Schematic Diagram ---------------------------------------------- 9
7 Exploded View and Replacement Parts List -----------10
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70
°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
3
3 Troubleshooting Guide
4
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
1. Remove the cap, the outer foil with foil frame and the
inner blade.
2.
NOTE:
If you do not replace the trimmer or trimmer handle,
proceed to No.4.
proceed to No.4.
Slide the trimmer handle up to open the trimmer and
unhook the trimmer handle by inserting a slotted screw-
driver.
NOTE:
unhook the trimmer handle by inserting a slotted screw-
driver.
NOTE:
In order to prevent the scratch or damage on the
housing, use the cushion under the screwdriver.
housing, use the cushion under the screwdriver.
3. Remove trimmer and trimmer handle.
