Panasonic ES-LF51 / ES-LF71 Simplified Service Manual ▷ View online
Order Number SD1106X60AE
Rechargeable Shaver
Model No.
ES-LF71
ES-LF51
ES-LF51
Europe
CIS
Oceania
CIS
Oceania
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Schematic Diagram ---------------------------------------------- 5
6 Exploded View and Replacement Parts List ------------ 6
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Schematic Diagram ---------------------------------------------- 5
6 Exploded View and Replacement Parts List ------------ 6
Please file and use this manual together with the service manual for Model No. ES-LA93/ES-LA63, Order
No.SD0904E30CE.
No.SD0904E30CE.
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70
°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
3
3 Troubleshooting Guide
(Operation of Self-cleaning Recharge)
4
4 Disassembly and Assembly Instructions
Follow the procedure below to disassemble the main body.
(a) Loosen a screw.
(b) Remove the bottom cover
(c) Push up the blade of trimmer.
(d) Loosen a screw.
(e) Remove the upper rear panel.
(f) Loosen two screws.
(g) Remove the rear panel.
(h) Loosen six screws.
(i) Remove the housing B.
(a) Loosen a screw.
(b) Remove the bottom cover
(c) Push up the blade of trimmer.
(d) Loosen a screw.
(e) Remove the upper rear panel.
(f) Loosen two screws.
(g) Remove the rear panel.
(h) Loosen six screws.
(i) Remove the housing B.