DOWNLOAD Sony DSC-H2 (serv.man3) Service Manual ↓ Size: 242.32 KB | Pages: 5 in PDF or view online for FREE

2006J1600-1

  ©2006.10

DSC-H2_L1

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Chinese Model

Argentina Model

Hong Kong Model

Korea Model

Tourist Model

Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.

Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.

— 2 —

DSC-H2_L1

These specifications are extracted from instruction
manual of DSC-H2 (2-673-166-11).

Image device

7.18 mm (1/2.5 type) color 
CCD, Primary color filter

Total pixel number of camera

Approx. 6 183 000 pixels

Effective pixel number of camera

Approx. 6 003 000 pixels

Lens

Carl Zeiss Vario-Tessar
12

×

 zoom lens

f = 6.0 – 72.0 mm (36 – 
432 mm when converted to a 
35 mm still camera)
F2.8 – 3.7

Exposure control Automatic exposure, Shutter 

speed priority, Aperture 
priority, Manual exposure, 
Scene Selection (7 modes)

White balance

Automatic, Daylight, Cloudy, 
Fluorescent, Incandescent, 
Flash, One push

File format (DCF compliant)

Still images: Exif Ver. 2.21
JPEG compliant, DPOF 
compatible
Movies: MPEG1 compliant 
(Monaural)

Recording media Internal Memory (30 MB)

“Memory Stick Duo”

Flash

Recommended distance (ISO 
set to Auto): approx. 0.3 m to 
9.0 m (11 7/8 inches to 29 feet 
6 3/8 inches) (W)/approx. 
0.9 m to 6.8 m (35 1/2 inches to 
22 feet 3 3/4 inches) (T)

Viewfinder

Electric viewfinder (color)

A/V OUT jack (Monaural)

Minijack
Video: 1 Vp-p, 75 

Ω

,

unbalanced, sync negative
Audio: 327 mV (at a 47 k

Ω

 

load)
Output impedance 2.2 k

Ω

USB jack

mini-B

USB communication

Hi-Speed USB (USB 2.0 
compliant)

LCD panel

5.1 cm (2.0 type) TFT drive

Total number of dots

84 960 (35424 0) dots

Panel

0.5 cm (0.2 type) color

Total number of dots

Approx. 200 000 dots 
equivalent

Power

HR 15/51:HR6 (size AA) 
Nickel-Metal Hydride batteries 
(2), 2.4 V

R6 (size AA) alkaline batteries 
(2), 3 V

ZR6 (size AA) Oxy Nickel 
Primary Battery (2), 3 V

AC-LS5K AC Adaptor 4.2 V

Power consumption (during shooting with the 

LCD screen)
1.1 W

Operating temperature

0 to 40

°

C (32 to 104

°

F)

Storage temperature

–20 to +60

°

C (–4 to +140

°

F)

Dimensions

113.28 3.094.0  mm
(4 1/2 inches

×

3 3/8 inches

×

3 3/4 inches) (W/H/D, 
excluding protrusions)

Mass

Approx. 537 g (1 lb 2.9 oz) 
(including two batterries, 
shoulder strap, adaptor ring, 
lens hood, lens cap, etc.)

Microphone

Electret condenser microphone

Speaker

Dynamic speaker

Exif Print

Compatible

PRINT Image Matching III

Compatible

PictBridge

Compatible

Power requirements

AC 100 to 240 V, 50/60 Hz, 
3 W

Output voltage

AA: DC 1.4V 400 mA 

×

2

AAA: DC 1.4 V 160 mA 

×

 2

 Operating temperature

0 to +40

°

C (+32 to +104

°

F)

Storage temperature

–20 to +60

°

C (–4 to +140

°

F)

Dimensions

Approx. 713091

 mm

(2 7/8

×

1 3/16

×

3 5/8 inches) 

(W/H/D)

Mass

Approx. 90 g (3 oz)

Design and specifications are subject to change 
without notice.

— 3 —

DSC-H2_L1

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

— 4 —

DSC-H2_L1

Display Code

C:32:01

C:13:01

Countermeasure

Turn off the main power then back on.

Replace the memory stick.
Format the memory stick with the DSC-H2.

Cause

Trouble with hardware.

• The type of memory stick that cannot be

used by this machine, is inserted.

• Data is damaged.
• Unformatted memory stick is inserted.

Caution Display During Error

SYSTEM ERROR

MS ERROR

Self-diagnosis display
• C: ss: ss

The contents which can be handled
by customer, are displayed.

• E: ss: ss

The contents which can be handled
by engineer, are displayed.

Copies all images in the internal memory to a “Memory Stick”.

1

Insert a “Memory Stick” having 32 MB or larger capacity.

2

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.

3

Select [OK] with v , then press z.
Copying starts. 

Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files 
using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly 
corrupting the data.
You cannot copy individual images.
The original images in the internal memory are retained even after copying. To delete the contents of the 
internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in 

 

Internal Memory Tool.
You cannot select a folder copied on a “Memory Stick”.
The setting of 

 (Print order) marks is not copied even when you copy data.

OK

See the following procedure.

Cancel

Cancels the copying.