Panasonic ER2403 / ER2405 Service Manual ▷ View online
Order Number SD0708M43CE
Body Hair/Beard Trimmer
Model No.
ER2403
ER2405
ER2405
Middle East
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Wiring Connection Diagram ---------------------------------- 9
6 Schematic Diagram ---------------------------------------------10
7 Exploded View and Replacement Parts List -----------11
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Wiring Connection Diagram ---------------------------------- 9
6 Schematic Diagram ---------------------------------------------10
7 Exploded View and Replacement Parts List -----------11
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70
°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
2.1.
ER2403
2.2.
ER2405
3
3 Troubleshooting Guide
3.1.
ER2403
3.2.
ER2405
4
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions for ER2403
1. Remove the attachment and the blade.
2. Loosen two housing screws.
2. Loosen two housing screws.
3. Remove the housing C.
4. Insert the flat-head screwdriver into the hole of switch
handle and raise it up.
5. Take out the switch cam and the O-ring.
NOTE:
Make sure not to lose them.
