Panasonic ER-SB60 Service Manual ▷ View online
5
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions.
1. Remove the blade block.
2. Remove 2 screws to detach the blade holder.
3. Remove the screw and 10 hooks to detach the rear panel.
4. Remove the 4 screws to detach the front panel.
5. Align the body block mark with location [3] and slide the
dial downwards to detach it.
6
6. Remove the switch button, dial click and spring.
*Be careful not to lose the dial click and spring.
7. Remove 3 screws and detach the retaining plate and
waterproof rubber.
8. Remove 2 screws to detach housing B.
9. Remove the rechargeable battery.
10. Remove the 2 screws to detach the linear motor block
and module.
*Soldering precautions
• When removing or applying solder, be careful not to
break or warp the parts due to heat.
• Be careful not to over-apply solder, cause cracks or
through-holes.
7
4.2.
Key points of Disassembly/
Assembly.
Assembly.
*Replace the blade springs.
Replace the blade spring placed between the ribs.
Be careful of the direction to attach the blade spring.
Be careful of the direction to attach the blade spring.
*Precautions for dial replacement or assembly.
When replacing or assembling the dial, apply grease
(FLOIL G741S) inside first.
(FLOIL G741S) inside first.
*Precautions for mounting the waterproof rubber.
Make sure to mount the waterproof rubber to cover the sur-
rounding area.
rounding area.
4.3.
Checks after the inspection/
repairs
repairs
• Check that there is no looseness or gap in the housing.
• After charging, turn the switch on and check that it works.
• After charging, turn the switch on and check that it works.
8
5 Exploded View and Replacement Parts List
5.1.
Exploded View
Click on the first or last page to see other ER-SB60 service manuals if exist.