Panasonic UF-585 / UF-595 (serv.man2) Service Manual ▷ View online
Panasonic UF-585 / 595
28
2.7
Eject Roller (303)
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.5).
(2) Remove the Stamp Assembly (325, 326) (Refer to 2.6).
(3) Release 2 Latch Hooks.
(4) Remove the Ground Plate (317).
(3) Release 2 Latch Hooks.
(4) Remove the Ground Plate (317).
(5) Release the Latch Hook by using a small Blade-tip
Screwdriver.
(6) Remove 2 D25F Drive Gears (332).
(7) Remove D17 Gear (313) and D50 Gear (314).
(7) Remove D17 Gear (313) and D50 Gear (314).
(8) Remove 2 P6C Bushings (342).
(9) Remove the Roller Wire Spring (343).
(9) Remove the Roller Wire Spring (343).
Caution:
Reinstall the Roller Wire Spring (343) according to the
illustration.
illustration.
(3)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Roller Spring
Disassembly Instruction
29
(10) Remove 2 P6A Bushings (316).
(11) Remove the Eject Roller (303).
(10)
(11)
Panasonic UF-585 / 595
30
2.8
Transmit Motor (324)
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.5).
(2) Remove the Stamp Assembly (325, 326) (Refer to 2.6).
(3) Disconnect the Harness (340) from the Transmit Motor.
(4) Remove the ADF Gear (305) and ADF Angular
(3) Disconnect the Harness (340) from the Transmit Motor.
(4) Remove the ADF Gear (305) and ADF Angular
Shaft (338).
Caution:
When removing the ADF Gear, rotate the Transmit Motor
Gear by hand until the Gear Latch Hook can be seen from the
inside, under the Transmit Motor. Push down on the Latch
Hook to release the ADF Gear.
Gear by hand until the Gear Latch Hook can be seen from the
inside, under the Transmit Motor. Push down on the Latch
Hook to release the ADF Gear.
(5) 2 Screws (19).
(6) Remove the Transmit Motor (324).
(6) Remove the Transmit Motor (324).
Caution:
Reinstall the Transmit Motor (324) according to the direction
shown in the illustration.
shown in the illustration.
Caution:
Before reassembling, apply EM-50L Grease to the Gear Posts
shown by the arrows in the illustration.
shown by the arrows in the illustration.
(3)
(4)
(5)
(6)
Disassembly Instruction
31
2.9
Scanner Block (321), Mirror 1 (334), Mirror 2 (335), Mirror 3 (336), ADF
Roller (331)
Roller (331)
(1) Remove the Transmit Guide (301) Assembly (Refer to
2.5).
(2) Remove the Stamp Assembly (325, 326) (Refer to 2.6).
(3) 1 Screw (19).
(4) Remove the Harnesses from the hook.
(5) Remove the Scanner Block (321).
(3) 1 Screw (19).
(4) Remove the Harnesses from the hook.
(5) Remove the Scanner Block (321).
(6) Remove P10 and P6B Bushings (315, 318) by using
Blade-tip Screwdriver.
(7) Remove the ADF Roller (331).
Cleaning Mirror 1 (334), Mirror 2 (335) and Mirror 3 (336)
Clean Mirror 1 (334), Mirror 2 (335) and Mirror 3 (336) with a
soft cloth, soaked with isopropyl alcohol.
Clean Mirror 1 (334), Mirror 2 (335) and Mirror 3 (336) with a
soft cloth, soaked with isopropyl alcohol.
(3)
(4)
(5)
(6)
(7)
Mirror 1
Mirror 2
Mirror 3
Click on the first or last page to see other UF-585 / UF-595 (serv.man2) service manuals if exist.