Panasonic UE-403162NA Service Manual / Supplement ▷ View online
Service Modes
33
Note :
The default setting of parameters depends on the country’s specifications or regulations. Print the Function Parameter List to
confirm the default settings.
confirm the default settings.
Function Parameter Table
No.
Parameter (see Note 3)
Selections
Function
130
BUSY-ACK TIMING
• In Busy
• After Busy
• While Busy
• After Busy
• While Busy
Selects the signal timing between the BUSY and
ACK signal in Printer Interface Mode.
ACK signal in Printer Interface Mode.
131
CMD RCV GRD TIMER
1 min.
~
15 min.
~
15 min.
Selects the Guard Timer between each GDI
Command in Printer Inteface Mode.
Command in Printer Inteface Mode.
132
PRT DATA TIMER
1 min.
~
15 min.
~
15 min.
Selects the Guard Timer between each GDI Data
Frame in Printer Interface Mode.
Frame in Printer Interface Mode.
133
COLLATION (PRT)
1 = Off
2 = On
3 = Auto
2 = On
3 = Auto
Selects the Print Collation in Printer Interface
Mode.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
Mode.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
135
JOB END TIMER
1 sec.
~
999 sec.
~
999 sec.
Selects the Guard Timer while printing a data with
the Panafax Printing System ver. 5e/6.
the Panafax Printing System ver. 5e/6.
136
JAM RECOVERY
1 = Off
2 = On
2 = On
Selects the JAM Recovery function in the PDL
Printer Interface Mode.
Off: Printing performance is faster, however if a
Printer Interface Mode.
Off: Printing performance is faster, however if a
paper jam occurs the jammed pages will not
be reprinted automatically.
be reprinted automatically.
On: Printing performance is slower, however if a
paper jam occurs the jammed pages will be
reprinted automatically.
reprinted automatically.
160
VERSION
Indicates the ROM version on the FRM
PC Board.
PC Board.
Page Description Language Printer Interface Kit
34
5.2
Service Mode 3 (Printout of Lists, Reports and Test Results)
From this Service Mode you can print the Function Parameter List, Page Memory Test, Printer Report, All Document File, Protocol
Trace and the Toner Order Form.
Trace and the Toner Order Form.
5.2.1
Function Parameter List
A list of all Funcion Parameters can be printed by the following procedure.
Step
Operation or Unit Condition
LCD Display
1
Standby
2
Press “FUNCTION” and then “7”.
3
Press “MONITOR” four times, then press “*”.
4
Press “3”.
5
Press “START”.
6
After printing is completed, the unit returns to the display in step 3.
7
Press “STOP” to return to standby.
JUL-12-1999 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
PRINTOUT (1-7)
1:FUNC. PARAM. LIST
FUNC. PARAMETER LIST
* PRINTING *
SERVICE MODE
ENTER NO. OR
JUL-12-1999 15:00
00%
Service Modes
35
Note:
1. [ ] - Factory Default
2. The contents of the Funcion Parameter List may vary depending on the country’s regulations.
3. “*” mark will be shown on the left side of number when setting was changed from default.
2. The contents of the Funcion Parameter List may vary depending on the country’s regulations.
3. “*” mark will be shown on the left side of number when setting was changed from default.
Function Parameter List (Sample)
************* -FUNCTION PARAMETER- ************* DATE JUL-12-1999 ***** TIME 12:07 ***P.02
100 ---------
150
---------
101 ---------
151
---------
102
---------
152
---------
103
---------
153
---------
104
---------
154
---------
105
---------
155
---------
106
---------
156
---------
107
---------
157
---------
108
---------
158
---------
109
---------
159
---------
110
---------
160
VERSION: OPTEPBBV31509
111
---------
161
---------
112
---------
162
---------
113
---------
163
---------
114
---------
164
---------
115
---------
165
---------
116
---------
166
---------
117
---------
167
---------
118
---------
168
---------
119
---------
169
---------
120
---------
170
---------
121
---------
171
---------
122
---------
172
---------
123
---------
173
---------
124
---------
174
---------
125
---------
175
---------
126
---------
176
---------
127
---------
177
---------
128
---------
178
---------
129
---------
179
---------
130
BUSY-ACK TIMING:[In Busy] In Busy
180
---------
131
CMD RCV GRD TIMER:[10min] 10min
181
---------
132
PRT DATA TIMER:[1min] 1min
182
---------
133
COLLATION (PRT):[Auto] Auto
183
---------
134
---------
184
---------
135
JOB END TIMER:[30sec] 30sec
185
---------
136
JAM RECOVERY:[Off] Off
186
---------
137
---------
187
---------
138
---------
188
---------
139
---------
189
---------
140
---------
190
---------
141
---------
191
---------
142
---------
192
---------
143
---------
193
---------
144
---------
194
---------
145
---------
195
---------
146
---------
196
---------
147
---------
197
---------
148
---------
198
---------
149
---------
199
---------
Note:The power must be reset for the new parameter settings to take effect.
-PANASONIC -
******************************** -PANAFAX- UF-895 - ******* -12345678901234567890- ***********
Page Description Language Printer Interface Kit
36
Notes
Click on the first or last page to see other UE-403162NA service manuals if exist.