DOWNLOAD Panasonic KX-MB773RU / KX-MB773UA (serv.man8) Service Manual ↓ Size: 13.66 MB | Pages: 127 in PDF or view online for FREE

9

10

• Help function

Display:

1. FEATURE LIST
2. DIRECTORY
3. FAX RECEIVING
4. CALLER ID

• LCD (Liquid Crystal Display) readout

Plain Paper Facsimile Machine
Output tray (approx. 150 sheets)
Letter/A4/Legal, G3 compatible
Automatic document feeder (Up to 20 sheets)
Quick scan
Resolution: Standard/Fine/Super fine/Photo (64 level).
STANDARD: For normal-sized characters.
FINE: For small-sized characters.

SUPER FINE: For very small-sized characters.
PHOTO: For photographs, shaded drawings, etc.
Broadcast 
250-sheet paper capacity (60 g/m

2

 ~ 75 g/m

2

)

Distinctive ring detection.

Large Memory... Performed by DRAM
Approx. 150 pages of memory transmission
Approx. 170 pages of memory reception

Enhanced Copier Function
Multi-copy function (up to 99 copies)
Enlargement and reduction
Collate

64-Level halftone

To use Multi-Function Station on your computer, the following are required:

Windows 98 / Windows Me / Windows 2000 / Windows XP / Windows Vista

TM

 operating system

Windows 98: Pentium® 90 MHz or faster
Windows Me: Pentium 150 MHz or faster
Windows 2000: Pentium 166 MHz or faster
Windows XP: Pentium 300 MHz or faster
Windows Vista: Recent Processor (x86) 800 MHz or higher processor

Windows 98: 24 MB (32 MB or more recommended)
Windows Me: 32 MB (64 MB or more recommended)
Windows 2000: 64 MB or more
Windows XP: 128 MB or more
Windows Vista: 512 MB or more

CD-ROM drive
Hard disk drive with at least 150 MB of available space
USB interface

11

12

This custom IC is used for general MFP operations.

This 8MB FLASH ROM contains all of the program instructions on the unit operations.
And support the backup of user setting and FAX receive data.

This 256Mbit SDRAM is used for CPU work and receiving memory and page memory.

DC-DC converters generate 3.3V and 1.2V for system power.
Regurator generates 5V for peripheral devices.

Composed of ITS circuit and NCU circuit.
3 ICs called SDAA(Silicon Direct Access Arrangement) control Telephone line, Speaker, and Handset.

CIS Unit to read transmitted documents.
CIS Unit is connected to FLATBED transit Unit.
Scan data is converted by AFE(IC503).

This model has 1 DC motor and 2 stepping motors.
IC300 drives the DC motor for printing.
IC502 and IC700 drive the stepping motor for Auto Document Feeder motor and CIS carriage.

Forms the images on the OPC DRUM by rotating polygon motor and reflecting the laser beam against polygon.

Composed of 2 switches and 5 sensors.

Supplies +24V and +7V to the Main unit and controls the Heat Lamp.

Supplies bias need for the printing operation: bias of the DRUM, Developing and Transcription.

Composed heat lamp, thermistor and thermostats.

1)

CPU

ARM9 operating at 250MHz.

2)

SDRAM Controller

Controls SDRAM Memory.

3)

USB Controller with PHY

Apply to USB2.0 HS

4)

Scanner I/F

Controls the CIS and AFE, and process the scan images.

5)

LSU I/F

Controls the polygon motor and outputs the VIDEO signal to LSU.

6)

MOTOR I/F

Controls the DC motor and Stepping Motor.

7)

FAN I/F

Controls FAN MOTOR and detect the rotation of FAN MOTOR.

8)

OPERATION PANEL I/F

Serial interface with Operation Panel.

9)

SENSOR I/F

Detects the sensor signal.

10) I/O PORT

I/O Port Interface.

11)

A/D, D/A converter

Sends beep tones, etc.
Convert the analog signal to the digital signal.

12) RTC

Real time clock.

13) MODEM

Performs the modulation and the demodulation for FAX communication.

14) Analog Front End I/F

Controls the DAA device for TEL/FAX function.