DOWNLOAD Sony DSC-W35 (serv.man3) Service Manual ↓ Size: 1.17 MB | Pages: 6 in PDF or view online for FREE

DSC-W35_L1

2007I0800-1

  © 2007.09

The components identified by
mark  0  or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.

Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Hong Kong Model

Chinese Model

Korea Model

Argentine Model

Brazilian Model

Japanese Model

Revised-1

Replace the previously issued
SERVICE MANUAL 9-852-152-41
with this Manual.

— 2 —

DSC-W35_L1

[System]
Image device: 7.20 mm (1/2.5 type) color CCD,

Primary color filter

Total pixel number of camera:

Approx. 7 410 000 pixels

Effective pixel number of camera:

Approx. 7 201 000 pixels

Lens: Carl Zeiss Vario-Tessar 3

× zoom lens f =

6.3 – 18.9 mm (38 – 114 mm when converted
to a 35 mm still camera) F2.8 –5.2

Exposure control: Automatic exposure, Scene

Selection (7 modes)

White balance:Automatic, Daylight, Cloudy,

Fluorescent, Incandescent, Flash

File format (DCF compliant):

Still images: Exif Ver. 2.21 JPEG compliant,
DPOF compatible
Movies: MPEG1 compliant (Monaural)

Recording media:Internal Memory (approx.

56 MB), “Memory Stick Duo”

Flash: Flash range (ISO sensitivity

(Recommended Exposure Index) set to Auto):
approx. 0.2 to 3.9 m (7 7/8 inches to 12 feet
9 5/8 inches) (W)/approx. 0.3 to 2.0 m (11 7/8
inches to 6 feet 6 3/4 inches) (T)

[Input and Output connectors]
A/V OUT jack: Minijack

Video, Audio (Monaural)

USB jack: mini-B
USB communication: Hi-Speed USB (USB 2.0

compliant)

[LCD screen]
LCD panel: 5.1 cm (2.0 type) TFT drive
Total number of dots: 84 960 (354 

× 240) dots

[Power, general]
Power: Rechargeable battery pack NP-BG1, 3.6 V

AC-LS5K AC Adaptor (not supplied), 4.2 V

Power consumption (during shooting with the

LCD screen on):
1.0 W

Operating temperature: 0 to 40 

°C (32 to 104 °F)

Storage temperature: –20 to +60 

°C (–4 to +140 °F)

Dimensions:

89.8 

× 59.1 × 22.9 mm (3 5/8 × 2 3/8 × 29/32

inches) (W/H/D, excluding protrusions)

Mass:

Approx. 149 g (5.3 oz) (including NP-BG1
battery pack and wrist strap, Etc.)

Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible

Power requirements: AC 100 to 240 V, 50/60 Hz,

2 W (BC-CSG/BC-CSGC) 2.6 W (BC-CSGB)

Output voltage: DC 4.2 V, 0.25 A
Operating temperature: 0 to 40 

°C (32 to 104 °F)

Storage temperature: –20 to +60 

°C (–4 to +140 °F)

Dimensions: Approx. 62 

× 24 × 91 mm (2 1/2 ×

31/32 

× 3 5/8 inches) (W/H/D)

Mass: Approx. 75 g (2.7 oz)

Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Capacity: 3.4 Wh (960 mAh)

Design and specifications are subject to change
without notice.

— 3 —

DSC-W35_L1

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270°C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

— 4 —

DSC-W35_L1

Self-diagnosis display
• C: ss: ss

You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)

• E: ss: ss

Contact your Sony dealer or local
authorized Sony service facility.

Display Code

  C:32:ss

  C:13:ss

Countermeasure

Turn the power off and on again.

Format the “Memory Stick” or internal
memory.

Insert a new “Memory Stick”.

Cause

Trouble with hardware.

“Memory Stick” or internal memory is
unformatted.

“Memory Stick” is broken.

Caution Display During Error

SYSTEM ERROR

FORMAT ERROR

MEMORY STICK ERROR

  E:61:ss

  E:91:ss

Turn the power off and on again.

Trouble with internal memory.

When failed in the focus and zoom
initialization.

Checking of lens drive circuit.

INTERNAL MEMORY ERROR

—

Checking of flash unit or replacement
of flash unit.

Abnormality when flash is being
charged.

The data can be copied by the operations on the Setup screen.

Copies all images in the internal memory to a “Memory Stick Duo”.

1 Insert a “Memory Stick Duo” having 64 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be copied Ready?” appears.

3 Select [OK] with v, then press z.

Copying starts. 

Select [Cancel] in step 

2 or 3, then press z.

• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little 

remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.

• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 

 (Internal Memory Tool) (page 54).

• When you copy the data in the internal Memory to the “Memory Stick Duo”, all the data will be copied. 

You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be 
copied.

• Even if you copy data, a 

 (Print order) mark is not copied.