DOWNLOAD Panasonic KX-MB1536RUB Service Manual ↓ Size: 15.38 MB | Pages: 127 in PDF or view online for FREE

93

KX-MB1536RU

The numbers in the boxes (XXX) indicate the keys to be input for the various test modes.

After performing this check, do not forget to turn the setting off.
otherwise, dialing in DTMF signal will not work.

SENSOR CHECK 

Service Mode

“8” “1” “5”

First of all, press the copy button, and confirm the action of ON/OFF. 
For each sensor’s operation, refer to Sensors and Switches Section (P.49).
LCD DISPLAY:

D: Document set
 -: No document

S: Document detect
 -: No document

C: Cover open
 -: Cover close

R: Paper detect
 -: No paper

E: Paper detect
 -: No paper

T: Toner detect
 -: No toner 

3F: 00 (high temp.) - FF (low temp.)

DF: 00 (high temp.) - FF (low temp.)

T: Paper detect
 -: No paper

N: New
 -: Secondhand

C: Contact
 -: No contact

Test Mode

Type of Mode

Code

Function

Operation after code 

input

94

KX-MB1536RU

95

KX-MB1536RU

1. NO.01

2. NO.06

3. NO.03

• These print test patterns are just image printing, and differ-

ent from actual ones.

• When it is required to judge the print quality, compare with

the printing of a nondefective machine.

96

KX-MB1536RU

The programming functions are used to program the various features and functions of the machine, and to test the machine.
This facilitates communication between the user and the service man while programming the unit.

There are 2 basic categories of programming functions, the User Mode and the Service Mode. The Service Mode is further broken
down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are available to
the user. The special programs are only those listed here and not displayed to the user. In both the User and Service Modes, there
are Set Functions and Test Functions. The Set Functions are used to program various features and functions, and the Test Func-
tions are used to test the various functions. The Set Functions are accessed by entering their code, changing the appropriate value,
then pressing the SET key. The Test Functions are accessed by entering their code and pressing the key listed on the menu. While
programming, to cancel any entry, press the STOP key.
Note:

When changing the set values on the service function table, they should not be set beyond the local regulation.
Follow the laws and regulations of your area.