Panasonic KX-FT57E Service Manual ▷ View online
ADJUSTMENTS
105
KX-FT57E
R
L
Reverse
White paper
Tape
Tape
3
2
1
3
The edge of the glass
and chart should be
put together, then fixed
with tape.
and chart should be
put together, then fixed
with tape.
L
R
(for the white level adjustment) (for the lens and CCD read position adjustment)
LED Array
Side
edge of the glass
Note: The white paper should cover the chart to protect it from outside
Light.
|
107
|
KX-FT57E
DISASSEMBLY INSTRUCTIONS
DISASSEMBLY INSTRUCTIONS
Page
1. How to Remove the Handset Cradle Cabinet .............................. 108
2. How to Remove the Operation Block ........................................... 109
3. How to Remove the Operation Board and LCD ........................... 110
4. How to Remove the Bottom Frame .............................................. 111
5. How to Remove the Analog, Digital Boards, Speaker and Mic .... 111
6. How to Remove the Power Supply Board and AC Inlet ............... 112
7. How to Remove the Motor Block .................................................. 112
8. How to Remove the CCD Unit ..................................................... 113
9. How to Remove the Rollers ......................................................... 113
10. How to Remove the Cutter Block ................................................. 114
11. How to Remove the Recording Paper Cover ............................... 115
12. How to Remove the Thermal Head Roller ................................... 116
13. How to Remove the Document Tray ............................................ 116
|
108
|
KX-FT57E
1) Press the front lid open button to open the operation block.
2) Pull the ribs as shown below.
3) Remove the handset cradle cabinet.
4) Remove the 3 screws (A).
2) Pull the ribs as shown below.
3) Remove the handset cradle cabinet.
4) Remove the 3 screws (A).
HOW TO REMOVE THE HANDSET CRADLE CABINET
(A)
(A)
(A)
1
2
2
3
3
FRONT LID OPEN BUTTON
HANDSET CRADLE CABINET
Ref. No. 1
Procedure
1
|
109
|
KX-FT57E
DISASSEMBLY INSTRUCTIONS
Fig. A
1
2
3
Latch
Arm
Operation Block
FRONT LID OPEN BUTTON
Fig. B
OPERATION BLOCK
1) Press the front lid open button in the direction of the arrow to open the operation block.
2) Pull both sides of the arms. (See Fig. A.)
3) Pull up the operation block.
2) Pull both sides of the arms. (See Fig. A.)
3) Pull up the operation block.
HOW TO REMOVE THE OPERATION BLOCK
1) Set both arms on the latch as shown in the following
Fig. B.
2) Push the operation block down.
HOW TO ATTACH THE OPERATION BLOCK:
Ref. No. 2
Procedure
2
Click on the first or last page to see other KX-FT57E service manuals if exist.