Panasonic KX-FT21RS Service Manual ▷ View online
1.11. LOCATION OF CONTROLS
1.11.1. OVERVIEW
1.11.2. CONTROL PANEL
9
KX-FT21RS
1.12. CONNECTIONS
NOTE
When you operate this products, the power outlet should be near the product and easily accessible.
10
KX-FT21RS
1.13. INSTALLATION
1.13.1. INSTALLING THE RECORDING PAPER
Open the cover by pressing the cover open button
and install the recording paper roll.
and install the recording paper roll.
If the paper is secured with glue or tape, cut
approximately 15 cm (6 inches) from the
beginning.
approximately 15 cm (6 inches) from the
beginning.
correct
incorrect
Tear off the excess paper by pulling it
towards you.
towards you.
Close the cover securely by pushing down on
both ends.
both ends.
Pull the leading edge of the paper approximately
10 cm (4 inches) out of the unit.
Make sure that there is no slack in the
10 cm (4 inches) out of the unit.
Make sure that there is no slack in the
paper roll.
Cover open
button
button
10 cm
1
2
3
4
Note:
Only use the included roll of paper or specified recording paper, or else the print quality may be affected and/or excessive
thermal head wear may occur.
For accessory order information.
When the power cord is connected, every time you close the cover a message will be printed. If the recording paper is set to
the wrong side, the message will not be printed. Install the paper correctly.
thermal head wear may occur.
For accessory order information.
When the power cord is connected, every time you close the cover a message will be printed. If the recording paper is set to
the wrong side, the message will not be printed. Install the paper correctly.
1.13.2. Document Stacker
Install the document stacker.
11
KX-FT21RS
1.13.3. SETTING YOUR LOGO
The logo can be your company, division or name.
Press MENU .
Display:
SYSTEM SET UP
Press # , then 0 2 .
YOUR LOGO
Press START/COPY/SET .
LOGO=
Enter your logo, up to 30 characters, by using
the dial keypad. See the next page for details.
Example: Bill
1. Press 2 twice.
LOGO=B
2. Press 4 six times.
LOGO=Bi
3. Press 5 six times.
LOGO=Bil
4. Press to move the cursor to the next
space and press 5 six times.
LOGO=Bill
To enter the same number key continuously,
move the cursor to the next space.
move the cursor to the next space.
Press START/COPY/SET .
SETUP ITEM [ ]
Press MENU .
To insert a character
1. Press or to move the cursor to the
position to the right of where you want to
insert the character.
2. Press (One-Touch Dial key 2) to insert a
position to the right of where you want to
insert the character.
2. Press (One-Touch Dial key 2) to insert a
space and enter the character.
To correct a mistake
Press or to move the cursor to the incorrect
character, then make the correction.
To delete a character
Move the cursor to the character you want to delete and
press STOP .
/
START/COPY/SET
(Delete)
STOP
MENU
1
2
Cursor
2
Note:
Words in blankets ( ) are Spanish. A translated version for each market is available with this
model series.
1
2
3
4
5
6
12
KX-FT21RS
Click on the first or last page to see other KX-FT21RS service manuals if exist.