Panasonic KX-FM131BX / KX-FM131CX Service Manual ▷ View online
PLATEN ROLLER
SPACER
Tweezers
COVER OPEN BUTTON
OPERATION PANEL BLOCK
Ref. No. 4
HOW TO REMOVE THE PLATEN ROLLER
Procedure
4
1) Remove the film cartridge.
2) Push the COVER OPEN BUTTON to open the OPERATION PANEL BLOCK.
3) Detach the SPACERs from the ribs as illustrated below.
4) Remove the PLATEN ROLLER.
2) Push the COVER OPEN BUTTON to open the OPERATION PANEL BLOCK.
3) Detach the SPACERs from the ribs as illustrated below.
4) Remove the PLATEN ROLLER.
125
KX-FM131BX / KX-FM131CX
DOCUMENT
GUIDE
GUIDE
DOCUMENT GUIDE
SEPARATION RUBBER
OPERATION PANEL
COVER
COVER
CONNECTOR
OPERATION BOARD
B
B
B
A
A
A
A
A
A
A
C
C
HOW TO REMOVE THE OPERATION BOARD, LCD AND DOCUMENT GUIDE
Ref. No. 5
Procedure
2 5
1) Remove the 6 screws .
2) Remove the OPERATION PANEL COVER.
3) Remove the 2 screws .
4) Disconnect the CONNECTOR.
5) Remove the OPERATION BOARD.
6) Remove the screw .
7) Remove the DOCUMENT GUIDEs.
2) Remove the OPERATION PANEL COVER.
3) Remove the 2 screws .
4) Disconnect the CONNECTOR.
5) Remove the OPERATION BOARD.
6) Remove the screw .
7) Remove the DOCUMENT GUIDEs.
126
KX-FM131BX / KX-FM131CX
A
A
A
CONNECTOR-A
CONNECTOR-A
CONNECTOR-B
CONNECTOR-C
AC INLET
ANALOG BOARD
POWER SUPPLY BOARD
DIGITAL BOARD
B
C
D
D
C
C
B
B
B
HOW TO REMOVE THE ANALOG, DIGITAL AND POWER SUPPLY BOARDS AND AC INLET
Ref. No. 6
Procedure
1 6
1) Remove the 2 screws .
2) Remove the ANALOG BOARD.
3) Disconnect the 7 CONNECTORs-A.
4) Remove the 3 screws .
5) Remove the DIGITAL BOARD.
6) Remove the 2 screws .
7) Remove the screw .
8) Disconnect the CONNECTOR-B and
the CONNECTOR-C.
9) Remove the POWER SUPPLY BOARD.
10) Remove the AC INLET.
2) Remove the ANALOG BOARD.
3) Disconnect the 7 CONNECTORs-A.
4) Remove the 3 screws .
5) Remove the DIGITAL BOARD.
6) Remove the 2 screws .
7) Remove the screw .
8) Disconnect the CONNECTOR-B and
the CONNECTOR-C.
9) Remove the POWER SUPPLY BOARD.
10) Remove the AC INLET.
127
KX-FM131BX / KX-FM131CX
WIND GEAR ASS'Y
A
A
A
C
C
C
B
B
HOW TO REMOVE THE MOTOR BLOCK AND THE WIND GEAR ASS'Y
1) Remove the 2 screws .
2) Remove the screw .
3) Remove the MOTOR BLOCK (See Ref. No. 7 (b)).
4) Remove the 2 screws .
5) Remove the WIND GEAR ASS'Y.
2) Remove the screw .
3) Remove the MOTOR BLOCK (See Ref. No. 7 (b)).
4) Remove the 2 screws .
5) Remove the WIND GEAR ASS'Y.
MOTOR BLOCK
(See Ref. No. 7 (b))
(See Ref. No. 7 (b))
Ref. No. 7 (a)
Procedure
1 7 (a)
128
KX-FM131BX / KX-FM131CX