Panasonic KX-FLB803SA Service Manual ▷ View online
9
KX-FLB803SA
5 Features
5.1.
General Features
General
• Help function
Display:
1. BASIC SETTINGS
2. FEATURE LIST
3. DIRECTORY
4. FAX RECEIVING
5. COPIER
6. REPORTS
7. CALLER ID
2. FEATURE LIST
3. DIRECTORY
4. FAX RECEIVING
5. COPIER
6. REPORTS
7. CALLER ID
• LCD (Liquid Crystal Display) readout
Plain Paper Facsimile Machine
Output tray (approx. 150 sheets)
Letter/A4/Legal, G3 compatible
Automatic document feeder (40 sheets)
Quick scan
Resolution: Standard/Fine/Super fine/Photo (64 level).
STANDARD: For printed or typewritten originals with normal-
sized characters.
FINE: For originals with small printing.
SUPER FINE: For originals with very small printing.
PHOTO: For originals containing photographs, shaded draw-
Output tray (approx. 150 sheets)
Letter/A4/Legal, G3 compatible
Automatic document feeder (40 sheets)
Quick scan
Resolution: Standard/Fine/Super fine/Photo (64 level).
STANDARD: For printed or typewritten originals with normal-
sized characters.
FINE: For originals with small printing.
SUPER FINE: For originals with very small printing.
PHOTO: For originals containing photographs, shaded draw-
ing, etc.
Broad cast
250-sheet paper capacity (60 g/m
Broad cast
250-sheet paper capacity (60 g/m
2
~ 75 g/m
2
[16 lb ~ 20 lb.])
Distinctive ring detection.
Separator
Separator
Large Memory... Performed by DRAM
Approx. 150 pages of memory transmission
Approx. 170 pages of memory reception
Approx. 150 pages of memory transmission
Approx. 170 pages of memory reception
Phone Line Monitor
On-hook dialing
Monitor speaker
Redialing function
314-Station telephone directory
On-hook dialing
Monitor speaker
Redialing function
314-Station telephone directory
Enhanced Copier Function
Multi-copy function (up to 99 copies)
Enlargement and reduction
Separator
Multi-copy function (up to 99 copies)
Enlargement and reduction
Separator
64-Level halftone
5.2.
HARDWARE REQUIREMENTS FOR MULTI-FUNCTION SOFTWARE
To use Multi-Function Station on your computer, the following are required:
Operating System:
Works with Windows 98/Me/2000/XP
*1)
CPU:
Windows 98: Pentium® 90 MHz or faster
Windows Me: Pentium 150 MHz or faster
Windows 2000: Pentium 166 MHz or faster
Windows XP
Windows Me: Pentium 150 MHz or faster
Windows 2000: Pentium 166 MHz or faster
Windows XP
*1)
: Pentium 300 MHz or faster
RAM:
Windows 98: 24 MB (32 MB or more recommended)
Windows Me: 32 MB (64 MB or more recommended)
Windows 2000: 64 MB or more
Windows XP
Windows Me: 32 MB (64 MB or more recommended)
Windows 2000: 64 MB or more
Windows XP
*1)
: 128 MB or more
Other Hardware:
CD-ROM drive
Hard disk drive with at least 100 MB of available space
USB interface
Hard disk drive with at least 100 MB of available space
USB interface
*1)
Multi-Function Station software does not work with Windows XP Professional x64 Edition (64bit) that was released in and after
April, 2005.
10
KX-FLB803SA
6 Technical Descriptions
6.1.
CONNECTION DIAGRAM
11
KX-FLB803SA
6.2.
GENERAL BLOCK DIAGRAM
The following is an outline of each device IC on the digital board.
SOC(IC600)
Mainly Performing program working and the image processing.
CPU:ARM9 DSP:Quatro DMA Function
Main Function
1) SDRAM Controller
2) USB Controller with PHY.
3) SCANNER I/F
4) Printer I/F
5) I/O Port
6) System Bus I/F
7) Serial I/F
SOC(IC600)
Mainly Performing program working and the image processing.
CPU:ARM9 DSP:Quatro DMA Function
Main Function
1) SDRAM Controller
2) USB Controller with PHY.
3) SCANNER I/F
4) Printer I/F
5) I/O Port
6) System Bus I/F
7) Serial I/F
G/A (IC604)
Controls the operation panel I/F.
Controls the LSU I/F.
Controls FANs, LEDs and Sensors and analog I/F.
Control the motor (DC motor and Stepping Motor)
Real Time Clock circuit
Controls the high Voltage Unit control
Contains A/D converter
Controls the operation panel I/F.
Controls the LSU I/F.
Controls FANs, LEDs and Sensors and analog I/F.
Control the motor (DC motor and Stepping Motor)
Real Time Clock circuit
Controls the high Voltage Unit control
Contains A/D converter
Flash ROM (IC602)
This 64 Mbit FLASH ROM contains all of the program instructions on the unit operations.
This 64 Mbit FLASH ROM contains all of the program instructions on the unit operations.
Synchronous Dynamic RAM (IC601)
This memory is used for Program working and Image processing.
This memory is used for Program working and Image processing.
Modem (IC607)
Performs the modulation and the demodulation for FAX communication.
Detect the CALLED ID signal.
Performs the modulation and the demodulation for FAX communication.
Detect the CALLED ID signal.
Read Section
CIS Unit to read transmitted documents.
CIS Unit connected to FLATBED transit Unit.
Scan data is converted by Analog Front End on Digital Board.
CIS Unit to read transmitted documents.
CIS Unit connected to FLATBED transit Unit.
Scan data is converted by Analog Front End on Digital Board.
Motor Driver
Drives the DC motor for Printing.
Drives the Stepping Motor for Auto Document Feeder and CIS carriage.
Drives the DC motor for Printing.
Drives the Stepping Motor for Auto Document Feeder and CIS carriage.
LSU (Laser Scanning Unit)
Forms the images on the OPC drum by rotating polygon motor and reflecting the laser beam against polygon.
Forms the images on the OPC drum by rotating polygon motor and reflecting the laser beam against polygon.
Analog Board
Composed of ITS circuit and NCU circuit.
Composed of ITS circuit and NCU circuit.
Sensor Section
Composed of 13 sensors (switches). (contains optional parts)
Composed of 13 sensors (switches). (contains optional parts)
Power Supply Board Section
Supplies +3.3V, +6V, 12V and +24V to the digital unit and controls the Heat Lamp.
Supplies +3.3V, +6V, 12V and +24V to the digital unit and controls the Heat Lamp.
High Voltage Power Supply Board
Supplies bias need for the printing operation: bias of the Drum, developing and transcription.
Supplies bias need for the printing operation: bias of the Drum, developing and transcription.
Fixing Unit
Composed heat lamp, thermistor and thermostats.
Composed heat lamp, thermistor and thermostats.
12
KX-FLB803SA
near
FUSER
TEL Jack
Transit
ADF Doc.& Open UNIT
FB TRANSIT UNIT
DIGITAL UNIT
SOC
(260p BGA)
G/A
(144p QFP)
USB
FLASH
MEMORY
64Mbit
SDRAM
256Mbit
OPERATION PANEL UNIT
LCD
16 x 2Line
OPE
G/A
LRCT50001
THERMISTOR
AFE
(20pin SOP)
ADF
MOTOR
DRIVER
FB MOTOR
FB
MOTOR
DRIVER
CIS MODULE
PRINT TIMING
SENSOR
REGISTER
SOLENOID
PICK-UP
SOLENOID
BIN CHANGE
SOLENOID
SMPS UNIT
HVPS UNIT
FAN RIGHT
(KX-FLB811 only)
DC MOTOR
THERMISTOR
CHARGE
DEV
TR
TOP COVER
SENSOR
24V
TONER
SENSOR
(HALL IC)
READ POSITION
SENSOR
DOCUMENT
SENSOR
ADF COVER
SENSOR
HEAT LAM
P
(800W)
THERMOSTAT1
THERMOSTAT2
ADF MOTOR
ADF RPS UNIT
VARISTOR
REGISTRATION &
MANUAL PAPER
SENSOR
MODEM
CONEXANT
(33.6kbps)
TEL LINE
Handset LINE (OPTION)
FAN LEFT
CN606
POLYGON
LASER
CN601
CN625
CN608
EXIT
SENSOR
HOME SENSOR
DRUM
SENSOR
PICK UP
SENSOR
PAPER
SENSOR
24V
12V
6V
3.3V
CN612
CN607
CN611
CN615
CN614
CN618
CN620
CN602
CN604
CN619
CN624
CN623
CN609
CN613
ANALOG UNIT
ANALOG
ASIC
CN200
CN51
CN57
CN58
HOOK WS
CN220
CN206
CN207
EXT TEL
SPEAKER
CN44
LSU
CN250
CN251
Handset Transit
CN42
CN940
CN53
CN56
CN54
CN617
IC607
IC600
IC601
IC602
IC604
IC612
Click on the first or last page to see other KX-FLB803SA service manuals if exist.