Panasonic KX-FLB803SA Service Manual ▷ View online
37
KX-FLB803SA
6.8.1.2.
ENGINE MOTOR
38
KX-FLB803SA
6.8.2.
ADF (Auto Document Feed) MOTOR DRIVE CIRCUIT
1. Functions
This motor functions for main operations including FAX transmission, ADF copy and PC scan.
This motor feeds document papers which are set to ADF with synchronizing for reading.
This motor feeds document papers which are set to ADF with synchronizing for reading.
2. Motor operation
During motor driving, pin 98 of ASIC IC604 becomes a high level, motor driver IC51 becomes active mode.
Stepping pulses are output from ASIC IC604 pins, 100 ~ 105 causing driver IC51 pins 4, 6, 7 and 9 to drive the motor coil.
The motor coil is energized sequentially in 2 phase increments, which causes a 1-step rotation.
A 1-step rotation feeds 0.042mm of document paper.
Stepping pulses are output from ASIC IC604 pins, 100 ~ 105 causing driver IC51 pins 4, 6, 7 and 9 to drive the motor coil.
The motor coil is energized sequentially in 2 phase increments, which causes a 1-step rotation.
A 1-step rotation feeds 0.042mm of document paper.
6.8.2.1.
TIMING CHART
39
KX-FLB803SA
6.8.2.2.
ADF (Auto Document Feed) MOTOR DRIVE CIRCUIT
40
KX-FLB803SA
6.8.3.
FB (Flatbed) MOTOR DRIVE CIRCUIT
1. Functions
This motor functions for main operations including FAX transmission, FB copy and PC scan.
This motor feeds CIS unit with synchronizing for reading.
This motor feeds CIS unit with synchronizing for reading.
2. Motor operation
During motor driving, pin 99 of ASIC IC604 becomes high level, motor driver IC54 becomes active mode.
Stepping pulses are output from ASIC IC604 pins, 100 ~ 105, causing driver IC54 pins 4, 6, 9 and 7 to drive the motor coil.
The motor coil is energized sequentially in 2 phase increments, which causes a 1-step rotation.
A 1-step rotation feeds 0.021mm of CIS unit.
Stepping pulses are output from ASIC IC604 pins, 100 ~ 105, causing driver IC54 pins 4, 6, 9 and 7 to drive the motor coil.
The motor coil is energized sequentially in 2 phase increments, which causes a 1-step rotation.
A 1-step rotation feeds 0.021mm of CIS unit.
6.8.3.1.
TIMING CHART
Click on the first or last page to see other KX-FLB803SA service manuals if exist.