Panasonic KX-FLB803SA Service Manual ▷ View online
41
KX-FLB803SA
6.8.3.2.
FB (Flatbed) MOTOR DRIVE CIRCUIT
42
KX-FLB803SA
6.9.
DRIVE MODE AND WAVEFORM OF ADF AND FB MOTOR
(1) Correspondent table of operation mode and waveform
(2) Waveform
Figure (1) (phase pattern : Flat torque 1-2 phase excitation)
43
KX-FLB803SA
Figure (2) (phase pattern : W1-2 phase excitation)
Figure (3) (phase pattern : Normal torque 1-2 phase excitation)
44
KX-FLB803SA
6.10. FAN MOTOR SECTION
These FAN are used to radiate heat in the unit.
6.10.1. Right side FAN (FAN1)
The signal level at pin G2/G3 of IC600 becomes high, the FAN is activated. In this case, the pulse signal as shown next page input
to pin P16 of IC600 and the rotation of the FAN is detected.
to pin P16 of IC600 and the rotation of the FAN is detected.
6.10.2. Left side FAN (FAN2)
The signal level at pin P17/R16 becomes high, the FAN is activated. In this case, the pulse signal as shown next page input to pin
P18 of IC600 and the rotation of the FAN is detected.
P18 of IC600 and the rotation of the FAN is detected.
Click on the first or last page to see other KX-FLB803SA service manuals if exist.