Panasonic KX-FC235G-S Service Manual ▷ View online
When set to ON (=1), the 12 keys and transmission
frequencies are as shown.
frequencies are as shown.
key
High Frequency (Hz)
key
Low Frequency (Hz)
“1”
697
“5”
1209
“2”
770
“6”
1336
“3”
852
“7”
1477
“4”
941
“8”
1633
Code
Button Name
04
FAX /START / SET
06
COPY
08
SP-PHONE
09
LOCATOR
0A
MUTE
0C
AUTO ANSWER
0D
CALLER ID
12
RECORD
14
MEMO
16
ERASE
18
PLAY MESSAGE
1E
[
] NEXT
1F
[
]PREV
20
MENU
22
HELP
25
[+] VOLUME
26
[—] VOLUME
31
1
32
2
33
3
34
4
35
5
36
6
37
7
38
8
39
9
3A
0
3B
3C
3C
#
3D
REDIAL / PAUSE
3E
FLASH (Recall)
00
NO INPUT
When set to OFF (=2), the 12 keys and transmission
frequencies are as shown.
frequencies are as shown.
High (Hz)
1209
1336
1477
Low (Hz)
697
697
“1”
“2”
“3”
770
“4”
“5”
“6”
852
“7”
“8”
“9”
941
“
”
“0”
“#”
7.4.1. DTMF Single Tone Transmit Selection
Note:
After performing this check, do not forget to turn the setting off.
Otherwise, dialing in DTMF signal will not work.
Otherwise, dialing in DTMF signal will not work.
7.4.2. Button Code Table
61
KX-FC235G-S
1. Platen roller
2. Left margin / Top margin
3. Thermal head 1 dot
4. Use this test pattern to confirm the torque limiter for Ink
film and platen roller timing.
film and platen roller timing.
7.4.3. Print Test Pattern
62
KX-FC235G-S
7.5. REMOTE PROGRAMMING
If, after the call is connected, the customer describes the situation and it is determined that the problem can be corrected by
making parameter changes, this function makes it possible to change parameters such as the user code and service code from
another fax (using DTMF tones). Therefore, travel to the customer´s location is not required. However, it is not possible to
change all the parameters remotely (Program Mode Table (P.64)). The function used to accomplish this is remote
programming.
making parameter changes, this function makes it possible to change parameters such as the user code and service code from
another fax (using DTMF tones). Therefore, travel to the customer´s location is not required. However, it is not possible to
change all the parameters remotely (Program Mode Table (P.64)). The function used to accomplish this is remote
programming.
First, in order to check the current status of the service code parameter, print out the setup list (code: 991) and the service list
(code: 999) from the customer´s fax machine.
Based on this, the parameters for the desired codes can be changed.
The procedure for changing and listing parameters is described on Entering the Remote Programming Mode and Changing
Service Codes (P.63). Also, before exiting the remote programming mode, it is advisable to obtain a new list to confirm that
the changes were made correctly.
(code: 999) from the customer´s fax machine.
Based on this, the parameters for the desired codes can be changed.
The procedure for changing and listing parameters is described on Entering the Remote Programming Mode and Changing
Service Codes (P.63). Also, before exiting the remote programming mode, it is advisable to obtain a new list to confirm that
the changes were made correctly.
Hint:
Since the connected telephone is in use during the remote programming mode, it may be helpful to ask the customer to switch
to the speakerphone. This frees the customer from the need to remain right next to the fax while you are making parameter
settings. When finished, inform the customer. Also note that in very noisy locations where the DTMF tones are not audible, the
remote programming function will not work.
to the speakerphone. This frees the customer from the need to remain right next to the fax while you are making parameter
settings. When finished, inform the customer. Also note that in very noisy locations where the DTMF tones are not audible, the
remote programming function will not work.
7.5.1. Entering the Remote Programming Mode and Changing Service Codes
CROSS REFERENCE:
Program Mode Table (P.64)
63
KX-FC235G-S
7.5.2. Program Mode Table
Code
Function
Set Value
Default
Remote
Setting
001
Set date and time
dd/mm/yy hh:mm
01/Jan/2005
NG
002
Your logo
---------
None
NG
003
Your FAX number
---------
None
NG
004
Print sending report
1:ERROR / 2:ON
ERROR
OK
006
TAD/FAX ring count
2~4 / 5:TOLL SAVER / 6: RINGER
OFF
OFF
2
OK
010
Recording time
1:VOX / 2~10: 1~9 MIN
VOX
OK
011
Remote TAD ID
ON / OFF
ON ID=111
NG
017
EXT. Ringer pattern
A / B / C
A
NG
022
Journal auto print
1:ON / 2:OFF
ON
OK
023
Overseas mode
1:NEXT FAX / 2:ERROR / 3:OFF
ERROR
OK
025
Delayed transmission
ON / OFF
OFF
NG
026
Auto Caller ID list
1:ON / 2:OFF
OFF
OK
034
Quick scan
1:ON / 2:OFF
OFF
OK
036
RCV reduction
1:72% / 2:86% / 3:92% / 4:100%
92%
OK
039
LCD contrast
NORMAL / DARKER
NORMAL
NG
041
FAX activation code
ON / OFF
ON ID=
#9
NG
042
Message alert
1:ON / 2:OFF
OFF
OK
043
REC. time alert
1:ON / 2:OFF
OFF
OK
044
Memory receive alert
1:ON / 2:OFF
ON
OK
046
Friendly reception
1:ON / 2:OFF
ON
OK
047
Voice guidance
1:ON / 2:OFF
ON
OK
048
Language
1:GERMAN / 2:ENGLISH
GERMAN
OK
053
SMS
1:ON / 2:OFF
OFF
OK
054
Greeting MSG. REC. time
1:16s / 2:60s
16s
OK
058
Scan contrast
1:NORMAL 2:LIGHT 3:DARKER
NORMAL
OK
067
ICM monitor
1:ON / 2:OFF
ON
OK
068
ECM selection
1:ON / 2:OFF
ON
NG
069
Fax transmission faster
1:ON / 2:OFF
OFF
OK
072
Remote turn on
1:ON / 2:OFF
ON
OK
073
Manual answer mode
1:TEL 2: TEL/FAX
TEL
OK
074
Location
1:GERMANY / 2:AUSTRIA
GERMANY
OK
075
Recall time (#074 setting is “GERMANY“)
0: 80ms / 1: 100ms / 2: 110ms /
3: 160ms / 4: 200ms / 5: 250ms /
6: 300ms / 7: 400ms / 8: 600ms /
9: 700ms
3: 160ms / 4: 200ms / 5: 250ms /
6: 300ms / 7: 400ms / 8: 600ms /
9: 700ms
200ms
OK
Recall time (#074 setting is “AUSTRIA“)
100ms
076
Connecting tone
1:ON / 2:OFF
ON
OK
077
Auto answer mode
1: FAX Only / 2:TAM/FAX
TAM/FAX
OK
078
TEL/FAX delayed ring
1~9
2
OK
080
Set default
YES / NO
NO
NG
501
Pause time
001~600 x 100msec
030 x 100msec
OK
502
Flash time (#074 setting is “GERMANY“)
01~99 x 10msec
20 x 10msec
OK
Flah time (#074 setting is “AUSTRIA“)
10 x 10msec
510
Vox time
1:8 sec / 2:6 sec / 3: 4 sec
6sec
OK
511
Vox sense
1:High / 2:Low
High
OK
514
Bell detection time
1~9 x 100msec
3 x 100msec
OK
520
CED frequency select
1:2100Hz / 2:1100Hz
2100Hz
OK
521
International mode select
1:ON / 2:OFF
OFF
OK
522
Auto standby select
1:ON / 2:OFF
ON
OK
523
Receive equalizer select
1:0km / 2:1.8km / 3:3.6km / 4:7.2km
0km
OK
524
Transmission equalizer select
1:0km / 2:1.8km / 3:3.6km / 4:7.2km
0km
OK
544
Document feed position adjustment value
set
set
1:3mm / 2:4mm / 3:5mm / 4:6mm /
5:7mm
5:7mm
5mm
OK
550
Memory clear
---------
---------
NG
551
ROM check
---------
---------
NG
552
DTMF signal tone test
1:ON / 2:OFF
OFF
OK
553
Monitor on FAX communication
1:OFF / 2:Phase B / 3:ALL
OFF
OK
554
Modem test
---------
---------
NG
555
Scanner test
---------
---------
NG
556
Motor test
---------
---------
NG
557
LED test
---------
---------
NG
558
LCD test
---------
---------
NG
559
Document jam detection
1:ON / 2:OFF
ON
OK
561
Key test
---------
---------
NG
570
Break % select
1:61% / 2:67%
61%
OK
64
KX-FC235G-S
Click on the first or last page to see other KX-FC235G-S service manuals if exist.