Panasonic DX-2000 Service Manual ▷ View online
10
13. Automatic Dialing
14. Gateway User Parameters
15. Print Reduction Ratio
16. Clock Backup Battery
This unit uses a Lithium battery to backup the clock and calendar.
The service life is approximately 1 year when the power to the machine is turned "Off".
The service life is approximately 1 year when the power to the machine is turned "Off".
(Note: This battery is not installed in the new unit, it is packaged with the accessories.)
Dialing Signal
:
10 PPS/20 PPS/DTMF
Dialing Method
One-Touch Dialing
Abbreviated Dialing
Manual Number Dialing
(Direct Dialing)
One-Touch Dialing
Abbreviated Dialing
Manual Number Dialing
(Direct Dialing)
:
:
:
:
:
Up to 40 keys (including 8 programmable keys)
Up to 160 stations
Up to 70 stations
(Up to 36 digits including pauses : PSTN)
(Up to 60 characters : LAN)
Up to 160 stations
Up to 70 stations
(Up to 36 digits including pauses : PSTN)
(Up to 60 characters : LAN)
Programmable Dialing
:
Up to 8 programmable keys
Combination Dialing
:
Combination of One-Touch, Abbreviated and Manual Number
Dialing
Dialing
Multi-Station Dialing
:
Multi-Station Transmission/Polling
[Up to 270 stations]
[Up to 270 stations]
Registration Memory Capacity in One-Touch and Abbreviated Dialing
Number of Stations
Number of Stations
:
Up to 200 stations
Telephone number of
each station (PSTN)
each station (PSTN)
:
Up to 36 digits (Including pauses and spaces)
Email Address of
each station (LAN)
each station (LAN)
:
Up to 60 characters
Station name for each
station
station
:
Up to 15 characters
Redialing
Automatic
Manual
Automatic
Manual
:
:
:
Up to 15 times with 0 to 15 minute intervals (PSTN only)
By pressing the Redial button (last number dialed for PSTN only)
By pressing the Redial button (last number dialed for PSTN only)
Domain Name
:
Up to 30 characters
Acceptable Domain Name(s)
for Relay Transmission
for Relay Transmission
:
Up to 10 domains
Relay XMT Password
:
Up to 10 characters
A4 / Letter
:
70 to 100% in 1% steps
Legal
:
85 to 100% in 1% steps (according to the received document length)
denotes hazards that could result in minor injury or damage to the machine.
CAUTION
!
• THIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED.
• REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.
11
1.4
Scanner Specifications
1. Document Dimensions
(Note: With operator’s assistance, a maximum of 2000 mm length document can be sent (one page at a time)
through the ADF.
through the ADF.
2. Automatic Document Feeder
The Automatic Document Feeder feeds the originals from the document tray automatically, starting with the bottom page.
3. Scanning Method
4. Effective Scanning Width : 252 mm
5. Scanning Resolution
6. Contrast Selection
3 steps (Normal / Lighter / Darker)
1.5.
Printer Specifications
1. Recording Paper Size (W x L)
2. Recommended Recording Paper Weight
60 to 90 g/m
2
3. Paper Capacity with standard cassette
500 sheets (75g/m
2
)
4. Printing Resolution
406 x 391 dpi (Fax or Copy)
600 x 600 dpi (Printer)
(Note: Page Memory (D-RAM) card is required for 600 dpi printing)
600 x 600 dpi (Printer)
(Note: Page Memory (D-RAM) card is required for 600 dpi printing)
Width
:
Minimum 148 mm
Maximum 280 mm
Maximum 280 mm
Length
:
Minimum 128 mm
Maximum 356 mm
Maximum 356 mm
Paper thickness
:
Single-page
: 0.06 to 0.15 mm
:
Multi-page
: 0.06 to 0.12 mm
Capacity
:
20 documents (Legal Size - 20 lb)
:
50 documents (Letter / A4 Size - 20 lb)
Horizontal
:
Sheet Feeding with CCD type image sensor
Vertical
:
Stepper Motor feeding
Standard
:
203 dpi x 98 lpi (8 pels/mm x 3.85 lines/mm)
Fine
:
203 dpi x 196 lpi (8 pels/mm x 7.7 lines/mm)
400 dpi
:
203 dpi x 391 lpi (8 pels/mm x 15.4 lines/mm)
406 dpi x 391 lpi (16 pels/mm x 15.4 lines/mm) (Interpolated)
406 dpi x 391 lpi (16 pels/mm x 15.4 lines/mm) (Interpolated)
Copy
:
406 dpi x 391 lpi (16 pels/mm x 15.4 lines/mm) (Interpolated)
Letter
:
216 x 279 mm
Legal
:
216 x 356 mm
A4
:
210 x 297 mm
12
5. Non Printable Margin
The shaded areas represent the unprintable area on the recording paper.
6. Printing Speed
10 ppm (6 seconds/page)
7. Fuser Warm Up Time
1.6
Power
1. Power Requirement
90~138 VAC, 47~63Hz, Single Phase (100V Version)
180~264VAC, 47~63Hz,Single Phase (200V Version)
180~264VAC, 47~63Hz,Single Phase (200V Version)
2. Power Consumption
1.7.
Environment
1. Operating Environment
2. Storage Environment (Carton Box Condition)
(Note: The machine should be stored upright.)
3. Transportation Environment (Max. 480 hours, Carton Box Condition)
Within 70 seconds after turning the power on.
[Room Temperature: 20 to 35
°
C]
[Power Voltage: Minimum 115 V]
Maximum
:
Approx. 470 W
Reception
:
Approx. 460 W
Copy
:
Approx. 470 W
Transmission
:
Approx. 23 W
Standby (Energy-Saver Mode: On)
:
Approx. 14 W/H
Standby (Energy-Saver Mode: Off)
:
Approx. 82 W/H
[Room temperature: 25
°
C]
Temperature
:
10 to 35
°
C
Relative Humidity
:
15 to 70% RH
Tilt
:
The unit must be kept on an even, level surface.
Temperature
:
-20 to 40
°
C
Relative Humidity
:
5 to 85% RH
Temperature
:
-20 to 50
°
C
Relative Humidity
:
15 to 85% RH
4 mm
4 mm
4 mm
4 mm
13
1.8.
Construction
1.8.1.
External View
Dimensions (W x D x H)
437 x 493 x 307 mm
Weight (excluding paper)
Approximately 17 Kg
417 mm
632 mm
677.5 mm
437 mm
307 mm
394 mm
513 mm
538 mm
493 mm
Click on the first or last page to see other DX-2000 service manuals if exist.