Panasonic DX-2000 Service Manual ▷ View online
22
2.3.
Sub Rear Cover (114), Internet Enclosure (1103), LANB PC Board (1102),
LANC PC Board (1101), FRM PC Board (1104), Rear Cover (108), Left
Side Cover (107), Front Cover (105), Speaker (133)
LANC PC Board (1101), FRM PC Board (1104), Rear Cover (108), Left
Side Cover (107), Front Cover (105), Speaker (133)
(1) Open the Printer Cover (122).
(2) Remove the Toner Cartridge.
(2) Remove the Toner Cartridge.
(3) Open the Control Panel Unit.
(4) Remove 1 Screw (B1).
(5) Remove the Memory Card Cover (115).
(6) Remove 4 Screws (B1).
(7) Remove the Sub Rear Cover (114).
(5) Remove the Memory Card Cover (115).
(6) Remove 4 Screws (B1).
(7) Remove the Sub Rear Cover (114).
(8) Remove 2 Screws (23).
Caution:
When re-installing these machine screws (screws with
washers), ensure they are placed on the top of the enclosure.
washers), ensure they are placed on the top of the enclosure.
(9) Remove 2 Screws (B1).
(1)
(2)
(3)
(7)
(6)
(4)
(5)
(6)
(6)
(9)
(8)
23
(10) Disconnect the Ribbon Cable Connector (CN7) on the
LANB PC Board.
Caution:
Caution:
When re-installing the Ribbon Cable, ensure that the
connector with the larger Ferite Core is inserted into the LANB
PC Board (CN7).
connector with the larger Ferite Core is inserted into the LANB
PC Board (CN7).
(11) Disconnect Connector CN1 and CN2 on the LANB PC
Board.
(12) Remove 2 Screws (23).
(13) Remove the LANC PC Board (1101) and disconnect Con-
(13) Remove the LANC PC Board (1101) and disconnect Con-
nector CN200 on the LANC PC Board.
(14) Remove 4 Screw (23).
(15) Remove the LANB PC Board (1102).
(15) Remove the LANB PC Board (1102).
(16) Release the two PCB Spacers (146).
(17) Remove the FRM PC Board (1104).
(17) Remove the FRM PC Board (1104).
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
24
(18) Remove 3 Screw (B1).
(19) Remove the Rear Cover (108).
(19) Remove the Rear Cover (108).
(20) Close the Control Panel Unit.
(21) 3 Screws (B1).
(22) Hold in the center and release the Latch Hook.
(23) Remove the Left Side Cover (107).
(21) 3 Screws (B1).
(22) Hold in the center and release the Latch Hook.
(23) Remove the Left Side Cover (107).
(24) Open the Control Panel Unit.
(25) 2 Screws (B1).
(26) Release the hook and remove the Front Cover (105).
(25) 2 Screws (B1).
(26) Release the hook and remove the Front Cover (105).
(27) Disconnect Connector on the Speaker Harness.
(28) 2 Screws (B1), 1 Screw (1Y).
(29) Remove the Speaker Assembly (133).
(28) 2 Screws (B1), 1 Screw (1Y).
(29) Remove the Speaker Assembly (133).
(18)
(19)
(21)
(23)
(10)
(10)
(22)
(25)
(26)
(29)
(27)
(28)
(28)
25
Cleaning Separation Rubber (229)
(1) Open the Control Panel Unit.
(2) Remove the Pre-Feed Cover (223).
(3) Clean the Separation Rubber (229) with a soft cloth, soaked
with isopropyl alcohol.
(1) Open the Control Panel Unit.
(2) Remove the Pre-Feed Cover (223).
(3) Clean the Separation Rubber (229) with a soft cloth, soaked
with isopropyl alcohol.
(3)
(2)
Click on the first or last page to see other DX-2000 service manuals if exist.