Panasonic DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG / DVD-LS835EEK Service Manual ▷ View online
<Displayed during normal operations>
9.3. Service Mode Table 1
The service modes can be activates by pressing various button combinations on the player and remote control unit.
Player buttons
Remote control unit buttons
Application
Note
PAUSE
+
PLAY
0
Displaying the UHF display F_ _ _
Refer to section 9.2.
Self-Diagnosis Function
(UHF Display).
Self-Diagnosis Function
(UHF Display).
5
Jitter check, tilt adjustment
*Display shows xx_yyyzz
"xx" and "zz" shown to the right have nothing to do with the
jitter value. "xx" is the error counter, while "zz" is the focus
drive value.
Refer to section 12.4. for Optical Pickup Tilt Adjustment
Procedure
*Display shows xx_yyyzz
"xx" and "zz" shown to the right have nothing to do with the
jitter value. "xx" is the error counter, while "zz" is the focus
drive value.
Refer to section 12.4. for Optical Pickup Tilt Adjustment
Procedure
Refer to section 12.4.
Optical adjustment.
Optical adjustment.
6
Checking the region numbers and broadcast system
7
Checking the program version
Check the IC3008
FLASH ROM program.
FLASH ROM program.
9
Lighting Confirmation Function of Display Tube
DISPLAY
Checking the laser drive current
Refer to section 8.5.
Optical Pickup
Replacement Procedure.
Optical Pickup
Replacement Procedure.
PAUSE
Writing the laser drive current value after replacing the optical
pickup (do not use for anything other than optical pickup
replacement)
pickup (do not use for anything other than optical pickup
replacement)
PAUSE
BWD-SKIP
PLAY
The user setting is returned to the state of the factory
shipment.
shipment.
Refer to section 9.6.
Initializing the DVD
player.
Initializing the DVD
player.
9.4. DVD Self Diagnostic Function-Error Code
Error Code
Error Content
Additional error explanation
Defect 1
Defect 2
Defect 3
Defect 4
U, H error
U11
Focus error
U15
DVD-R not finalized
H01
Tray loading error
H02
Spindle servo error
(Spindle servo, DSC SP motor, CLV servo error)
H03
Traverse servo error
H04
Tracking servo error
H05
Seek error
H07
Spindle motor drive
error
DSC related
error
DSC related
F500
DSC error
DSC stops in the occurrence of servo error (start
up, focus error, etc)
up, focus error, etc)
OPU
DV5.0
(IC3001)
DV5.0
(IC3001)
servo
drive
F501
DSC not Ready
DSC-system computer communication error
(Communication failure caused by idling of DSC)
(Communication failure caused by idling of DSC)
DV5.0
(IC3001)
DV5.0
(IC3001)
F502
DSC Time out error
Similar disposal as F500
OPU
DV5.0
(IC3001)
DV5.0
(IC3001)
servo
drive
F505
DSC Attention error
Similar disposal as F500
OPU
DV5.0
(IC3001)
DV5.0
(IC3001)
servo
drive
F506
Invalid media
Disc is flipped over, TOC unreadable,
incompatible disc
incompatible disc
DISC
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
ODC related
F600
Access failure to
management
information caused by
demodulation error
management
information caused by
demodulation error
Operation stopped because navigation data is
not accessible caused by the demodulation
defect
not accessible caused by the demodulation
defect
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
F601
Indeterminate sector ID
requested
requested
Operation stopped caused by the request to
access abnormal ID data
access abnormal ID data
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
F602
Access failure to LEAD-
IN caused by
demodulation error
IN caused by
demodulation error
LEAD IN data unreadable
F603
Access failure to
KEYDET caused by
demodulation error
KEYDET caused by
demodulation error
Access failure to CSS data of disc
F610
ODC abnormality
No permission for command execution
DV5.0
(IC3001)
F612
No CRC OK for a
specific time
specific time
Access failure to ID data in DVD series
DV5.0
(IC3001)
F630
No reply to KEY DET
enquiry
enquiry
(for internal use only)
25
DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG
Error Code
Error Content
Additional error explanation
Defect 1
Defect 2
Defect 3
Defect 4
F631
CPPM KEY DET is not
available till the FILE
terminal
available till the FILE
terminal
(CPPM file system is unreadable caused by
scratches)
scratches)
DISC
CPPM
F632
CPPM KEY DET is not
available
available
Been revoked or falsified
DISC
EEPROM
(IC3002)
CPPM
(*1)
Disc code
F103
Illegal highlight Position Big possibility of disc specification violation
during highlight display
DISC
IIC Error
F4FF
Force initialize failure
(time out)
(time out)
EEPROM
(IC3002)
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
Micro computer error
F700
MBX overflow
When replying message to disc manager
F701
Message command
does not end
does not end
Next message is sent before replying to disc
manager
manager
F702
Message command
changes
changes
Message is changed before it is sent as a reply
to disc manager
to disc manager
F890
Sending message when
message is being sent
to AV task
message is being sent
to AV task
Sending message to AV task
F891
Message couldn’t be
sent to AV task
sent to AV task
F894
EEPROM abnormality
EEPROM
(IC3002)
Serial
communication
on line
F895
Language area
abnormality
abnormality
Firm version agreement check for factory preset
setting failure prevention
setting failure prevention
FROM
(IC3008)
F896
No existence model
Firm version agreement check for factory preset
setting failure prevention
setting failure prevention
FROM
(IC3008)
F897
Initialize is not
completed
completed
Initialize completion check for factory preset
setting failure prevention
setting failure prevention
F8A0
Message command is
not appropriate
not appropriate
Begin sending message to AV task
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disc for protection of copyrights.
*1: CPPM is the copy guard function beforehand written in the disc for protection of copyrights.
9.5. Last Error Code saved during NO PLAY
Error code
Error Content
F0BF
6) Cannot playback because physical layer is not recognizable
F0C0
8) DVD: Cannot playback because it is not DVD Video/Audio/VR
F0C1
9) DVD: Prohibited by the restricted region code
F0C2
A) DVD: PAL restricted playback
F0C3
B) DVD: Parental lock setting prohibits the playback of the entire title
D0C5
VCD/CD: Prohibited because it is CDROM without CD-DA
26
DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG
9.6. Service mode table
Pressing various button combinations on the player and remote control unit can activate the service modes.
27
DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG
9.7. Lens cleaning
When cleaning the lens, use the lens cleaner which product part No. SZZP1038C.
28
DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG
Click on the first or last page to see other DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG / DVD-LS835EEK service manuals if exist.