DOWNLOAD Panasonic DMR-EH49EEA / DMR-EH59EEA Service Manual ↓ Size: 7.78 MB | Pages: 99 in PDF or view online for FREE

33

In this document, explanations basically use illustrations of DMR-EX79A. In other models, shape of some parts may be differ-
ent.

The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing. To assemble the unit, reverse the steps shown in the chart below

34

1. Remove the 2 screws (A) and 3 screws (B).
2. Slide Top Case rearward and open the both ends at rear

side of the Top Case a little and lift the Top Case in the
direction of the arrows.

1. Remove the Wire with connector
2. Unlock 6 tabs in (A) - (F).

Pull with the Front Panel in the direction of your side.

1. Attach the Tray door spring to Tray door ass’y.

2. Attach Tray door ass’y in order from 

 to 

.

 Insert the shaft in the hole.

 Insert the shaft in the hole.

3. Confirm the Tray door spring is attached as following.

35

1. Remove the 2 Screws (A) to remove the Front (L) P.C.B.

and Front (R) P.C.B.

1. Remove the 3 Screws (A), 1 Screw (B), SATA Power

Cable and SATA Cable to remove HDD.

2. Put HDD with HDD angle up and down inversely so as

not to give a shock to HDD.

3. Remove 4 Screws (C) to remove HDD from HDD angle.

36

1. Set free Fan connector wire from Wire Clamper.
2. Remove the 2 Screws (A) and Fan connector, remove the

Fan Motor with pushing 2 tabs in the direction of arrows.

1. Set free Fan connector wire from Wire Clamper.
2. Remove 7 Screws (B) and 2 Screws (C).
3. Disconnect the Fan connector and unlock 2 Tabs (A) to

remove Rear Panel.

1. Remove the 4 Screws (A).