Panasonic DMP-B100EB / DMP-B100EE / DMP-B100EG Service Manual ▷ View online
21
7 Troubleshooting Guide
7.1.
Self-Diagnosis Functions
Self-Diagnosis Function provides information for errors to service personnel by “Self-Diagnosis Display” when any error has
occurred.
U**, H** and F** are stored in memory and held.
You can check latest error code by transmitting [0] [1] of Remote Controller in Service Mode.
In case of clear the self-diagnosis display, remove the battery pack and the AC adaptor from the main unit after the power of the
main unit is turned off.
occurred.
U**, H** and F** are stored in memory and held.
You can check latest error code by transmitting [0] [1] of Remote Controller in Service Mode.
In case of clear the self-diagnosis display, remove the battery pack and the AC adaptor from the main unit after the power of the
main unit is turned off.
Error Code
Diagnosis contents
Description
LCD Display
U580
Battery supply current abnormality
A problem has occurred with the battery pack. Consult
your dealer.
your dealer.
U581
Abnormal charge time on battery power The battery pack has been recharging but has failed to
recharge for some reason. Recharge again.
U582
Battery-powered temperature anomaly You are recharging in a location that is too hot or too cold.
Recharge at normal temperature [+5 to +35 °C (+41 to
+95 °F)].
+95 °F)].
U59
Abnormal inner temperature detected
Display appears when drive temperature exceeds 70°C.
The power is turned off forcibly.
For 30 minutes after this, all key entries are disabled.
The event is saved in memory as well.
The power is turned off forcibly.
For 30 minutes after this, all key entries are disabled.
The event is saved in memory as well.
"U59" is displayed for 30 minutes.
U72
HDMI connection error
(communication error)
(communication error)
This error is displayed when there are any communication
problems with the unit and the equipments (TV, amplifier
etc.) connected to the unit by HDMI. (or when there is a
problem with the HDMI cable).
The display disappears only when the connection is
released. Neither the button operation nor the passage of
the fixed time disappear the display.
problems with the unit and the equipments (TV, amplifier
etc.) connected to the unit by HDMI. (or when there is a
problem with the HDMI cable).
The display disappears only when the connection is
released. Neither the button operation nor the passage of
the fixed time disappear the display.
U73
HDMI connection error
(authentication error)
(authentication error)
When authentication error occurs while the equipments
(TV, amplifier etc.) are connected by HDMI. (or when
there is a problem with the HDMI cable).
The display disappears only when the connection is
released. Neither the button operation nor the passage of
the fixed time disappear the display.
(TV, amplifier etc.) are connected by HDMI. (or when
there is a problem with the HDMI cable).
The display disappears only when the connection is
released. Neither the button operation nor the passage of
the fixed time disappear the display.
U76
Connection error
This error is displayed when equipment such as TVs or
amplifiers connected to the unit with the HDMI cable do
not correspond to the copyright protection. (The BD/DVD
video where the copyright is protected cannot be played.)
amplifiers connected to the unit with the HDMI cable do
not correspond to the copyright protection. (The BD/DVD
video where the copyright is protected cannot be played.)
U77
Illegal disc error
This error is displayed when it becomes impossible to
reproduce because of copyright illegal information.
reproduce because of copyright illegal information.
U88
Restoration is operation.
(When the disc is in the disc tray)
(When the disc is in the disc tray)
This error is displayed when there is a disc in the disc tray
or abnormality is confirmed during playback. It is shown
that the restoration to return the main unit operation
normally is operating. It becomes possible to use as soon
as not the breakdown but the U88 display disappears.
or abnormality is confirmed during playback. It is shown
that the restoration to return the main unit operation
normally is operating. It becomes possible to use as soon
as not the breakdown but the U88 display disappears.
Display for 30 seconds.
H19
No working Fun Motor
Preserves the Error record in case the Fun Motor doesn't
work at the time of Power-On.
work at the time of Power-On.
No display
F00
No error information
Initial setting for error code in memory
(Error code Initialization is possible with error code initial-
ization and main unit initialization.)
(Error code Initialization is possible with error code initial-
ization and main unit initialization.)
Not automatic display. Press [0][1]
in service mode. (Remote control-
ler key)
in service mode. (Remote control-
ler key)
F58
Drive hardware error
When drive unit error is detected, the event is saved in
memory.
memory.
Not automatic display. Press [0][1]
in service mode. (Remote control-
ler key)
in service mode. (Remote control-
ler key)
F74
HDMI Device Key Communication
error
error
This error is displayed when the information error is
occurred at HDMI device key loading.
occurred at HDMI device key loading.
F75
HDMI Device Key Loading error
This error is displayed when the key of loaded is illegal at
HDMI device key loading.
HDMI device key loading.
22
F99
Hang-up
Displayed when communication error has occurred
between Main microprocessor and Timer microprocessor.
between Main microprocessor and Timer microprocessor.
"F99" is displayed utill the [Power]
key is pressed.
key is pressed.
UNSUP-
PORT
PORT
Unsupported disc error
This error is displayed when the following are detected.
1. When the unsupported format disc is reproduced.
2. When the unsupported format data is saved in the
supported format disc.
3. When it becomes impossible to read because the
quality of the disc is bad.
1. When the unsupported format disc is reproduced.
2. When the unsupported format data is saved in the
supported format disc.
3. When it becomes impossible to read because the
quality of the disc is bad.
"This disc is incompatible."
Display for 5 seconds.
Display for 5 seconds.
No Read
Disc read error
This error is displayed when the following are detected.
1.When the disc is dirty or damaged.
2. When falling in reading the reack information.
3. When the drive error occurs.
1.When the disc is dirty or damaged.
2. When falling in reading the reack information.
3. When the drive error occurs.
"Cannot read, please check the
disc."
Display for 5 seconds.
disc."
Display for 5 seconds.
Hard Error Drive error
This error is displayed when the drive detected a hard
error.
error.
"DVD drive error."
Display for 5 seconds.
Display for 5 seconds.
Self Check Restoration operation
This error is displayed when the restoration is operating
because it is power failures or turns off power during a
operation. If there is no problem, the display disappears
automatically. If a display does not disappear, there is the
possibility that defective Main P.C.B. / Drive unit.
because it is power failures or turns off power during a
operation. If there is no problem, the display disappears
automatically. If a display does not disappear, there is the
possibility that defective Main P.C.B. / Drive unit.
Unformat
Unformatted disc error
This error is displayed when the unformatted DVD-RAM/
DVD-RW or the DVD-RW recorded by another make of
recorder is inserted.
DVD-RW or the DVD-RW recorded by another make of
recorder is inserted.
This disc is not formatted properly.
Format the disc in DISC
MANAGEMENT?
Format the disc in DISC
MANAGEMENT?
Error Code
Diagnosis contents
Description
LCD Display
23
8 Service Fixture & Tools
Part No.
Uses
Pcs
Interchangeability with Old Fixture Tools
-----
New CD-R disc
1
-----
SD DIAG CARD <128MB - 2GB>
(SDHC memory card cannot be used)
(SDHC memory card cannot be used)
1
RFKZ0558(5Pin)+ RFKZ0559
Extension cable + connector
(Traverse Unit-Main P.C.B.)
(Traverse Unit-Main P.C.B.)
1
New
RFKZ0560(8Pin) + RFKZ0561
Extension cable + connector
(Traverse Unit-Main P.C.B.)
(Traverse Unit-Main P.C.B.)
1
New
RFKZ0562(6Pin)+ RFKZ0563
Extension cable + P.C.B.
(PC-Main P.C.B. (P51601)
(PC-Main P.C.B. (P51601)
1
New
RFKZ0139
Serial Cable (PC-Main P.C.B. (P51601)/6pin)
1
New
RFKZ03D01KS
Lead Free Solder (0.3mm/100g Reel)
Sharing with EH55/EH75V/XP10/XW30 Series
RFKZ06D01KS
Lead Free Solder (0.6mm/100g Reel)
Sharing with EH55/EH75V/XP10/XW30 Series
RFKZ10D01KS
Lead Free Solder (1.0mm/100g Reel)
Sharing with EH55/EH75V/XP10/XW30 Series
RFKZ0316
Lead Free Solder with Low Melting Point
for Unsolder (50g)
for Unsolder (50g)
Sharing with EH55/EH75V/XP10/XW30 Series
RFKZ0328
Flux
Sharing with EH55/EH75V/XP10/XW30 Series
24
9 Disassembly and Assembly Instructions
9.1.
Disassembly Flow Chart
Click on the first or last page to see other DMP-B100EB / DMP-B100EE / DMP-B100EG service manuals if exist.