Panasonic HDC-HS100P / HDC-HS100PC / HDC-HS100PL / HDC-HS100E / HDC-HS100EB / HDC-HS100EE / HDC-HS100EF / HDC-HS100EG / HDC-HS100EP / HDC-HS100GC / HDC-HS100GK / HDC-HS100GN / HDC-HS100GT / HDC-HS100SG / HDC-HS100EEK Service Manual ▷ View online
25
6.4.
HDD Hardware Test
1. Set the mode dial “HDD Recording” mode.
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 14 ] HDD hardware test.
Operation specifications
Indication contents
• HDD hardware test display
Display the HDD hardware test result information.
• The error cord contents which are displayed
Push the menu button to end the service mode, and then POWER OFF.
Error code
Function
NO ERROR
It is normal without the error
CTR ERROR
Controller Resistor Error
BUFF RAM ERROR
Buffer RAM Error
ECC DEV ERROR
ECC device Error
CPU ERROR
CPU RAM/ROM Error
COMMAND
Reserved
26
7 Service Fixture & Tools
7.1.
When Replacing the Main PCB
After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
7.2.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
RFKZ0379
PP6001 (MAIN) - HDD UNIT
40PIN 0.5 B to B
2
RFKZ0495
PS6011 (MAIN) - MOS UNIT
50PIN 0.4 B to B
3
RFKZ0487
FP6002 (MAIN) - LENS UNIT
35PIN 0.3 FFC
4
RFKZ0343
PP6002 (MAIN) - PP6401 (FLASH)
30PIN 0.5 B to B
5
VFK1933
PS6003 (MAIN) - LCD UNIT
34PIN 0.5 B to B
6
VFK2020
PS6101 (SUB) - BATT UNIT
20PIN 0.5 B to B
7
VFK1175
FP6402 (MAIN) - REAR CASE FPC
16PIN 0.5 FFC
8
VFK1440
FP6003 (MAIN) - LENS BARRIER
10PIN 0.5 FFC
9
VFK1442
FP6004 (MAIN) - EVF UNIT
21PIN 0.3 FFC
27
CAUTION-1. (When servicing FLASH PCB)
1. Be sure to discharge the capacitor on FLASH PCB.
Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH PCB”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
28
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart
8.2.
PCB Location
Click on the first or last page to see other HDC-HS100P / HDC-HS100PC / HDC-HS100PL / HDC-HS100E / HDC-HS100EB / HDC-HS100EE / HDC-HS100EF / HDC-HS100EG / HDC-HS100EP / HDC-HS100GC / HDC-HS100GK / HDC-HS100GN / HDC-HS100GT / HDC-HS100SG / HDC-HS100EEK service manuals if exist.