Panasonic H-F007014PP / H-F007014E / H-F007014GK Service Manual ▷ View online
9
Fig.D1
10
4.2.
Lens Hood replacement procedure
4.2.1.
Disassembly Procedure
IMPORTANT
It must be performed inside of satisfied clean level.
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
1. Removal of the Decoration Ring
*.Decoration ring is sticked on the 1st lens frame unit.
*.Peel off the Decoration ring by inserting the hexwrench
(Size:Less than 0.7mm) between the Decoration ring and
Lens hood at several point, and then peel off it gradually.
*.Peel off the Decoration ring by inserting the hexwrench
(Size:Less than 0.7mm) between the Decoration ring and
Lens hood at several point, and then peel off it gradually.
2. Removal of the Lens Hood
*.Remove 3 screws (A).
*.Remove 4 screws (B) and a screw (C).
Take care not to miss the Earth plate.
Take care not to miss the Earth plate.
11
*.Remove the Zoom drive pin with a minus driver.
*.Remove 6 screws (D).
*.Remove the Lens hood and replace it.
Take care not to miss the Dust-proof ring.
*.Remove the Lens hood and replace it.
Take care not to miss the Dust-proof ring.
12
4.2.2.
Assembly Procedure
IMPORTANT NOTICE:
*.When tightening the screw, use a Torque driver (RFKZ0456) by ordering
the screwing order with specified torque descrived in each step.
the screwing order with specified torque descrived in each step.
1. Installing the Lens hood
*.Install the Dust-proof ring onto the lens hood.
*.Install the lens hood to ring base 1u.
*.Tighten the 6 screws (D) in numerical order ([1] to [6]) with
specified torque.
[Torque spec.: 10+/- 1.2N-cm.]
*.Install the lens hood to ring base 1u.
*.Tighten the 6 screws (D) in numerical order ([1] to [6]) with
specified torque.
[Torque spec.: 10+/- 1.2N-cm.]
*.Align the phase between Zoom ring and lens body u by
rotating the zoom ring, then tighten the Zoom drive pin with
a minus driver.
rotating the zoom ring, then tighten the Zoom drive pin with
a minus driver.
Click on the first or last page to see other H-F007014PP / H-F007014E / H-F007014GK service manuals if exist.