Panasonic H-F007014PP / H-F007014E / H-F007014GK Service Manual ▷ View online
5
2.2.
CAUTIONS FOR USE
6
2.3.
COMPONENTS
2.3.1.
Accessories
2.3.2.
Attaching/Detaching the Lens
7
3 SERVICE FIXTURE & TOOLS
3.1.
SERVICE FIXTURE AND TOOLS
The following Service Fixture and Tools are used for Checking & Servicing for this unit.
3.2.
Clean Box
• The repair quality is considered, and it is recommended working in the environment of satisfied clean level less than
class 10,000 (Federal Standard 209D).
(When removing the lens hood, it is imdispensable.)
(When removing the lens hood, it is imdispensable.)
[NOTE]
• Work in the environment of satisfied clean level less than class 10,000 (Federal Standard 209D) when remove the lens hood.
*Refer to “4. Disassembly/Assembly procedures” section for
details.
*Refer to the “Jig Information” on the “Support Information from NWBG/VDBG-AVC” web-site in “TSN system” for details.
8
4 Disassembly/Assembly procedures
4.1.
Disassembly/Assembly procedures [1]
It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
1.
When servicing the surrounding part with red line (refer to Fig.D1), it must be performed inside of satisfied clean level.
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
As for procedure, refer to the “4.2.Lens Hood replacement procedure” for details.
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
As for procedure, refer to the “4.2.Lens Hood replacement procedure” for details.
2. To minimize the possibilities/risk of getting the dust/dirt on thelens surface, keep covering the lens unit with
Lens caps (front & rear), other than necessary cases.
3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
Proceed disassemble/ and assemble, by referring the following table and Fig.D1
NOTE:
1. When tightening the screw, use a Torque driver (RFKZ0456) by ordering the screwing order with specified torque
descrived in each step.
2. It is not required screwing the Screw “Ref.B8”, for disassembling and assembling.
Use VFK1390 (small driver) when tighting the screw “Ref.B8”.
CONCERNED PART
SCREW
Part Name
Ref No.
Ref. No.
Colour
Length
Screwing order
Torque spec.
SHADING FRAME
9
B2
Black
3mm
[1]
12±1.0N-cm
B1
Black
3mm
[2]
12±1.0N-cm
B3
Black
3mm
[3]
12±1.0N-cm
MOUNT CONTACT U
6
B9
Silver
3mm
[1]
7±1.0N-cm
L MOUNT UNIT
8
B7
Silver
5mm
[1]
18±1.2N-cm
B4
Silver
5mm
[2]
18±1.2N-cm
B6
Silver
5mm
[3]
18±1.2N-cm
B5
Silver
5mm
[4]
18±1.2N-cm
REAR FRAME 2U
21
B12
Black
4mm
[1]
18±1.2N-cm
B14
Black
4mm
[2]
18±1.2N-cm
B13
Black
4mm
[3]
18±1.2N-cm
LENS P.C.B.
---
B11
Silver
3mm
[1]
5±1.0N-cm
B10
Silver
3mm
[2]
5±1.0N-cm
Click on the first or last page to see other H-F007014PP / H-F007014E / H-F007014GK service manuals if exist.