DOWNLOAD Panasonic DMC-TZ6EB / DMC-TZ6EE / DMC-TZ6EF / DMC-TZ6EG / DMC-TZ6EP / DMC-TZ6GC / DMC-TZ6GN / DMC-TZ6PR / DMC-ZS1GH / DMC-ZS1GK / DMC-ZS1P / DMC-ZS1PC / DMC-ZS1PU Service Manual ↓ Size: 4.55 MB | Pages: 65 in PDF or view online for FREE

45

Do not touch the surface of lens, Viewfinder and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:

The Lens Cleaning KIT ; VFK1900BK(Only supplied as 10 set/Box) is available as Service Aid.

S-1

S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1

S2. Voltage Chart ........................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2

S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3

S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Top Operation Schematic Diagram ....................................... S-5
S4.3. Top MIC Schematic Diagram ................................................ S-6
S4.4. Flash Schematic Diagram ..................................................... S-7
S4.5. CCD Flex Schematic Diagram .............................................. S-8
S4.6. Lens Flex Schematic Diagram .............................................. S-9

S5. Print Circuit Board .................................................................. S-10
S5.1. Top Operation P.C.B. ........................................................... S-10

S5.2. Flash P.C.B. ........................................................................ S-11
S5.3. CCD Flex P.C.B. .................................................................. S-12
S5.4. Lens Flex P.C.B. .................................................................. S-13

S6. Replacement Parts List .......................................................... S-15
 
S7. Exploded View ....................................................................... S-19
S7.1. Frame and Casing Section.................................................. S-19
S7.2. Packing Parts and Accessories Section .............................. S-20

Table of contents

DSC0903020CE

Vol. 1

(S)...........Silver Type (except DMC-TZ6PR)

Colour

(K)...........Black Type

Model No.
DMC-TZ6EB
DMC-TZ6EE
DMC-TZ6EF
DMC-TZ6EG
DMC-TZ6EP
DMC-TZ6GC
DMC-TZ6GN

DMC-TZ6PR
DMC-ZS1GH
DMC-ZS1GK
DMC-ZS1P
DMC-ZS1PC
DMC-ZS1PU

Digital Camera

Name of Signal

OFTR

FEP

This signal is connected
to the FEP schematic diagram.

Circuit name being connected.

6.Use the parts number indicated on the Replacement Parts List .

7.Indication on Schematic diagrams:

5.The voltage being indicated here may be include observational-error (deviation) due to

internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.

4.Although the voltage and waveform available on here is measured with standard frame,

it may be differ from actual measurement due to modification of circuit and so on.

3.The voltage being indicated on the schematic diagram is measured in

"Standard-Playback" mode when there is no specify mode is mentioned.

2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.

when the TP (Test Point) indicated as " " mark.

1.Although reference number of the parts is indicated on the P.C.B. drawing and/or

schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.

FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.

COMPONENTS IDENTIFIED WITH THE MARK

HAVE THE SPECIAL CHARACTERISTICS

S-2

Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. 

          Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. 

REF No.

PIN No.

POWER ON

IC8001

1

3

IC8001

2

0

IC8001

3

0

IC8001

4

0

IC8001

5

3

Q8009

1

5.1

Q8009

2

5.1

Q8009

3

0

Q8009

4

0

Q8009

5

5.1

Q8009

6

5.1

S-3

IC3101
CCD

IC3001

FOCUS

IRIS

CDS, AGC,
A/D, TG,
CCD DRIVER

FLASH ROM
/512Mbit

IC6002

SDRAM/256Mbit

SD
CARD

IC5501

IC9001

IC9101

IC6001
VENUS 4

FLASH

X9101

(32.768kHz)

X6001

(24MHz)

IC1001
POWER

SHUTTER

IC9101

ZOOM

1/2.5" 10.3 MEGA PIX

/MULTI TERMINAL

COLOUR LCD

2.7" PANEL

SPEAKER

IC7101
GYRO
SENSOR X/Y

DMC-TZ6, ZS1 OVERALL BLOCK DIAGRAM

SPEAKER CONTROL

230.4K PIX

(Type of LCD Driver inclusion)

(4.1mm - 49.2mm)

OIS UNIT

PRE PROCESS

MOTOR DRIVE,
OIS DRIVE &
PRE PROCESS

REAR OPERATION UNIT

TOP OPERATION UNIT

SYSTEM IC

CAMERA PROCESS
J-PEG COMP/EXPAND
MEDIA I/F
USB I/F
MAIN MICROPROCESSOR
OIS CONTROL
LENS DRIVE
LCD DRIVE

VIDEO OUT

MICROPHONE AMP

AUDIO AMP

DIGITAL/AV OUT

PANEL

BATTERY

(POWER SUPPLY)

MICROPHONE