Panasonic DMC-TZ6EB / DMC-TZ6EE / DMC-TZ6EF / DMC-TZ6EG / DMC-TZ6EP / DMC-TZ6GC / DMC-TZ6GN / DMC-TZ6PR / DMC-ZS1GH / DMC-ZS1GK / DMC-ZS1P / DMC-ZS1PC / DMC-ZS1PU Service Manual ▷ View online
41
8.5.7.
Assembly for the Zoom Motor Unit
and Master Flange Unit
and Master Flange Unit
8.6.
Removal of the CCD Unit
To prevent the CCD unit from catching the dust and dirt, do
not remove the CCD unit except for replacing.
not remove the CCD unit except for replacing.
42
8.7.
Removal of the Zoom Motor
Unit
Unit
8.8.
Removal of the Focus Motor
Unit
Unit
43
8.9.
The Applyment of Grease
Method
Method
The grease apply point of lens unit are as follows.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
• Focus motor nut moving part
- Grease: RFKZ0472
- Amount of apply: 3 - 5 mg
- Amount of apply: 3 - 5 mg
• 4th lens frame positioning pole, guide pole
- Grease: RFKZ0472
- Amount of apply: 0.15 - 0.35 mg
- Amount of apply: 0.15 - 0.35 mg
44
9 Measurements and Adjustments
9.1.
Matrix Chart for Replaced Part and Necessary Adjustment
The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-AVC”.
NOTE:
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-AVC”.
NOTE:
After adjustments have been terminated, make sure to achieve “INITIAL SETTINGS”.
*1 This adjustment is necessary, not only replacing CCD unit but also removing it from the lens unit.
NOTE:
NOTE:
*There is no LCD adjustment in this model.
Replaced Part
Adjustment Item
Main P.C.B.
VENUS
(IC6001)
Flash-ROM
(IC6002)
Lens Part
(Excluding
CCD)
CCD Unit
Camera
Section
Section
OIS hall element adjustment
(OIS)
(OIS)
O
O
O
O
-
Back focus adjustment
(BF)
(BF)
O
O
O
O
O*1
Shutter adjustment
(SHT)
(SHT)
O
O
O
O
O
ISO sensitivity adjustment
(ISO)
(ISO)
O
O
O
O
O
AWB adjustment High brightness coloration inspection
(WBL)
(WBL)
O
O
O
O
O
CCD white scratch compensation
(WKI)
(WKI)
O
O
O
-
O*1
CCD black scratch compensation
(BKI)
(BKI)
O
O
O
-
O*1
Venus zoom inspection
(PZM)
(PZM)
O
O
O
-
-
Monitor linearity inspection
(MLN)
(MLN)
O
O
O
O
O
Color reproduction inspection /mic inspection
(COL)
(COL)
O
O
O
O
O
Click on the first or last page to see other DMC-TZ6EB / DMC-TZ6EE / DMC-TZ6EF / DMC-TZ6EG / DMC-TZ6EP / DMC-TZ6GC / DMC-TZ6GN / DMC-TZ6PR / DMC-ZS1GH / DMC-ZS1GK / DMC-ZS1P / DMC-ZS1PC / DMC-ZS1PU service manuals if exist.