DOWNLOAD Panasonic DMC-TZ1PP / DMC-TZ1PL / DMC-TZ1EB / DMC-TZ1EE / DMC-TZ1EF / DMC-TZ1EG / DMC-TZ1EGM / DMC-TZ1GC / DMC-TZ1GK / DMC-TZ1GN / DMC-TZ1GT / DMC-TZ1SG Service Manual ↓ Size: 2.9 MB | Pages: 63 in PDF or view online for FREE

13

14

1. General description

This unit is equipped with history of error code memory function, and can be memorized 32 error codes in sequence from the
latest. When the error is occurred more than 32, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (when the unit is powered on by the battery, the
battery is pulled out) because the error code is memorized to FLASH ROM when the unit is powered off.

2. How to display

The error code can be displayed by the following procedure:
Before perform the error code memory function, connect the AC adaptor or insert the battery, and insert the SD card.

• 1. The temporary cancellation of factory setting:

Set the mode dial to “[ Normal picture mode ] (Red camera mark)”.
While keep pressing [ Optical Image Stabilizer Button ] and “[ UP ] of Cross key” simultaneously, turn the Power on.

• 2. The display of error code:

Press [ Optical Image Stabilizer Button ], [ MENU ] and “[ LEFT ] of Cross key” simultaneously with the step 1 condition.
The display is changed as shown below when the above buttons is pressed simultaneously.
Normal display 

→ Error code display → Operation history display → Normal display → .....

Example of Error Code Display

• 3. The change of display:

The error code can be memorized 32 error codes in sequence, however it is displayed 5 errors on the LCD.
Display can be changed by the following procedure:
“[ UP ] or [ DOWN ] of Cross key” : It can be scroll up or down one.
“[ LEFT ] or [ RIGHT ] of Cross key” : It can be display last 5 error or another 5 error.

15

• 4. How to read the error code:

One error code is displayed for 8 bit, the contents of error codes is indicated the table as shown below.

Attribute

Main item

Sub item

Error code

Contents (Upper)

High 4 bits Low 4 bits

Check point (Lower)

LENS

Lens drive

OIS

1800

1000 

PSD (X) error. Hall element (X axis) position detect error in OIS unit.
OIS Unit

2000 

PSD (Y) error. Hall element (Y axis) position detect error in OIS unit.
OIS Unit

3000 

GYRO (X) error. Gyro (IC7101: X axis) detect error on Main P.C.B..
IC7101 (Gyro element) or IC6001 (VENUS 3)

4000 

GYRO (Y) error. Gyro (IC7101: Y axis) detect error on Main P.C.B..
IC7101 (Gyro element) or IC6001 (VENUS 3)

5000 

MREF error (Reference voltage error).
IC7001 (LENS drive) or IC6001 (VENUS 3)

6000 

Drive voltage (X) error.
OIS Unit, LENS flex breaks etc.

7000 

Drive voltage (Y) error.
OIS Unit, LENS flex breaks etc.

C.B./Zoom

0100

HP Low detect error (C.B. encoder (full retract) always Low detect).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)

0200

HP High detect error (C.B. encoder (full retract) always High detect).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)

0300

ENC1 detect error (C.B. motor encoder detect error).
Zoom motor, Motor driver, Zoom pulse encoder 1.

0400

ENC2 detect error (C.B. motor encoder detect error).
Zoom motor, Motor driver, Zoom pulse encoder 2.

Zoom

0010

HP Low detect error (Zoom encoder always Low detect error).

0020

HP High detect error (Zoom encoder always High detect error).

Focus

0001

HP Low detect error (Focus encoder always Low detect error).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)

0002

HP High detect error (Focus encoder always High detect error).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)

0005

Focus lock error (Focus is not possible to drive to a specified position).
Obstacle mixing, Focus MR sensor output, Motor driver.

0006

Focus comparate sinal (phase A) is irregular.
Focus Motor, Focus MR sensor output, Motor driver.

0007

Focus comparate sinal (phase B) is irregular.
Focus Motor, Focus MR sensor output, Motor driver.

0008

Focus reference voltage is irregular.
Motor driver.

Lens

1801

0000

Power ON time out error.
Lens drive system

1802

0000

Power OFF time out error.
Lens drive system

16

• 5. How to returned to Normal Display:

Turn the power off and on, to exit from Error code display mode.

The error code can not be initialized.

LENS

Adj.History

OIS

1900

2000

OIS adj. Yaw direction amplitude error (small)
OIS Unit, LENS flex breaks.

3000

OIS adj. Pitch direction amplitude error (small)
OIS Unit, LENS flex breaks.

4000

OIS adj. Yaw direction amplitude error (large)
OIS Unit, LENS flex breaks.

5000

OIS adj. Pitch direction amplitude error (large)
OIS Unit, LENS flex breaks.

6000

OIS adj. MREF error
OIS Unit, LENS flex breaks.

7000

OIS adj. time out error
Zoom motor, Focus motor, LENS flex breaks.

8000

OIS adj. Yaw direction off set error
OIS Unit.

9000

OIS adj. Pitch direction off set error
OIS Unit.

A000

OIS adj. Yaw direction gain error
OIS Unit.

B000

OIS adj. Pitch direction gain error
OIS Unit.

C000

OIS adj. Yaw direction position sensor error
OIS Unit, LENS flex breaks.

D000

OIS adj. Pitch direction position sensor error
OIS Unit, LENS flex breaks.

E000

OIS adj. other error
OIS Unit, LENS flex breaks.

HARD

VENUS A/D

Flash

2800

0000

Flash charging error.
IC6001-(279) signal line or Flash charging circuit

FLASH ROM

(EEPROM 

Area)

FLASH ROM

(EEPROM 

Area)

2B00

0001

EEPROM read error
IC6002 (FLASH ROM)

0002

EEPROM write error
IC6002 (FLASH ROM)

SYSTEM

RTC

2C00

0001

SYSTEM IC initialize error
Communication between IC6001 (VENUS 3) and IC9101 (SYSTEM)

SOFT

CPU

Reset

3000

0001

|

0007

NMI reset
Non Mask-able Interrupt
(30000001-30000007 are caused by factors)

Card

Card

3100

0001

Card logic error
SD card data line or IC6001 (VENUS 3)

0002

Card physical error
SD card data line or IC6001 (VENUS 3)

0004

Write error
SD card data line or IC6001 (VENUS 3)

3900

0005

Format error

CPU, 

ASIC hard

Stop

3800

0001

Camera task finish process time out.
Communication between Lens system and IC6001 (VENUS 3)

0002

Camera task invalid code error.
IC6001 (VENUS 3)

0100

File time out error in recording motion image
IC6001 (VENUS 3)

0200

File data send error in recording motion image
IC6001 (VENUS 3)

Operation

Power on

3B00

0000

FLASHROM processing early period of camera during movement.

Zoom

Zoom

3C00

0000

I do not complete zoom lens processing

3500

0000

I jumped into dummy processing
(0-7bit : command, 8-15bit : Status)

3501

0000

Though record preprocessing is necessary, it is not called.

3502

0000

Though record preprocessing is necessary, it is not completed.

Attribute

Main item

Sub item

Error code

Contents (Upper)

High 4 bits Low 4 bits

Check point (Lower)