Panasonic DMC-LX3P / DMC-LX3PC / DMC-LX3PL / DMC-LX3E / DMC-LX3EB / DMC-LX3EE / DMC-LX3EF / DMC-LX3EG / DMC-LX3GC / DMC-LX3GD / DMC-LX3GK / DMC-LX3GN / DMC-LX3GT / DMC-LX3GJ / DMC-LX3SG Service Manual ▷ View online
29
Fig. D17
NOTE: (When Assembling)
Be sure to confirm the following points when assembling.
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no illegal-
• Assembling conditions are fine. (No distortion, no illegal-
space.)
• No dust and/or dirt on every Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
8.4.
Disassembly Procedure for the
Lens
Lens
NOTE: When Disassembling and Assembling for the Lens
1. Do not disassemble the lens unit. (Excluding the Zoom
motor and sensors)
Otherwise, it is no longer able to maintain its lens perfor-
mance.
Otherwise, it is no longer able to maintain its lens perfor-
mance.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
4. Use lens cleaning KIT (BK)(VFK1900BK).
8.4.1.
Removal of the Zoom Motor Unit
1. Remove the 2 solders (A).
2. Remove the 4 locks (A), and then remove the flex from
2. Remove the 4 locks (A), and then remove the flex from
the zoom motor unit.
3. Unscrew the 2 screws (A).
4. Remove the zoom motor unit to the indicated by arrow
4. Remove the zoom motor unit to the indicated by arrow
(1).
30
9 Measurements and Adjustments
9.1.
Matrix Chart for Replaced Part and Necessary Adjustment
The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:
After adjustments have been terminated, make sure to achieve “INITIAL SETTINGS”.
NOTE:
*There is no LCD adjustment in this model.
Replaced Part
Adjustment Item
Main P.C.B.
VENUS
(IC6001)
Flash-ROM
(IC6002)
Lens Part
Camera
Section
Section
OIS hall element adjustment
(OIS)
(OIS)
O
O
O
O
Back focus adjustment
(BF)
(BF)
O
O
O
O
Shutter adjustment
(SHT)
(SHT)
O
O
O
O
ISO sensitivity adjustment
(ISO)
(ISO)
O
O
O
O
AWB adjustment
High brightness coloration inspection
(WBL)
High brightness coloration inspection
(WBL)
O
O
O
O
CCD white scratch compensation
(WKI)
(WKI)
O
O
O
-
CCD black scratch compensation
(BKI)
(BKI)
O
O
O
-
IRIS adjustment
(IRS)
(IRS)
O
O
O
O
Venus zoom inspection
(PZM)
(PZM)
O
O
O
-
Monitor linearity inspection
(MLN)
(MLN)
O
O
O
O
31
10 Maintenance
10.1. Cleaning Lens and LCD Panel
Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
The Lens Cleaning KIT ; VFK1900BK (Only supplied as 10 set/Box) is available as Service Aid.
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Schematic Diagram ..................................................... S-5
S4.3. Top Operation Schematic Diagram ....................................... S-6
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Schematic Diagram ..................................................... S-5
S4.3. Top Operation Schematic Diagram ....................................... S-6
S5. Print Circuit Board .................................................................... S-7
S5.1. Flash P.C.B. .......................................................................... S-7
S5.2. Top Operation P.C.B. ............................................................. S-8
S5.1. Flash P.C.B. .......................................................................... S-7
S5.2. Top Operation P.C.B. ............................................................. S-8
S6. Replacement Parts List ........................................................... S-9
S7. Exploded View ....................................................................... S-14
S7.1. Frame and Casing Section.................................................. S-14
S7.2. Packing Parts and Accessories Section (1) ........................ S-15
S7.3. Packing Parts and Accessories Section (2) ........................ S-16
S7.1. Frame and Casing Section.................................................. S-14
S7.2. Packing Parts and Accessories Section (1) ........................ S-15
S7.3. Packing Parts and Accessories Section (2) ........................ S-16
Table of contents
Service Manual
DSC0808038CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (except PC/PL/GD/GN/GT/GJ)
Colour
(K)...........Black Type
Model No.
DMC-LX3P
DMC-LX3PC
DMC-LX3PL
DMC-LX3E
DMC-LX3EB
DMC-LX3EE
DMC-LX3P
DMC-LX3PC
DMC-LX3PL
DMC-LX3E
DMC-LX3EB
DMC-LX3EE
DMC-LX3EF
DMC-LX3EG
DMC-LX3GC
DMC-LX3GD
DMC-LX3GK
DMC-LX3GN
DMC-LX3EG
DMC-LX3GC
DMC-LX3GD
DMC-LX3GK
DMC-LX3GN
DMC-LX3GT
DMC-LX3GJ
DMC-LX3SG
DMC-LX3GJ
DMC-LX3SG
Digital Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
Click on the first or last page to see other DMC-LX3P / DMC-LX3PC / DMC-LX3PL / DMC-LX3E / DMC-LX3EB / DMC-LX3EE / DMC-LX3EF / DMC-LX3EG / DMC-LX3GC / DMC-LX3GD / DMC-LX3GK / DMC-LX3GN / DMC-LX3GT / DMC-LX3GJ / DMC-LX3SG service manuals if exist.