Panasonic DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT Service Manual ▷ View online
25
DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT
12 ERROR CODE MEMORY FUNCTION
1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, oldest error is overwritten in sequence.
latest. When the error is occurred more than 16, oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (when the unit is powered on by the battery, the
battery is pulled out) because the error code is memorized to FLASH ROM when the unit is powered off.
battery is pulled out) because the error code is memorized to FLASH ROM when the unit is powered off.
2. How to display
The error code can be displayed by the following procedure:
Before perform the error code memory function, connect the AC adaptor or insert the battery, and insert the SD card.
·
1. The temporary cancellation of initial setting:
Set the drive mode lever to “ Single
”.
While keep pressing AFL/AEL
and FILM MODE
simultaneously, then turn the Power on.
·
2. The display of error code:
Press FILM MODE
, MENU/SET
and “ LEFT
of Cursor key” simultaneously with the step 1 condition.
The display is changed as shown below when the above buttons is pressed simultaneously.
Normal display
→
Error code display
→
Operation history display
→
Normal display
→
.....
Example of Error Code Display
·
3. The change of display:
The error code can be memorized 16 error codes in sequence, however it is displayed 5 errors on the LCD.
Display can be changed by the following procedure:
" UP
or DOWN
of Cursor key": It can be scroll up or down one.
" LEFT
or RIGHT
of Cursor key": It can be display last 5 error or another 5 error.
·
4. How to read the error date:
The error date code is displayed from the left in order at the year, month, day, time.
Error date information is acquired from "Clock setting" information when the error occurs. When the clock is not setting, it
is displayed as "00000000".
is displayed as "00000000".
·
5. How to read the error code:
One error code is displayed for 8 bit, the contents of error codes is indicated the table as shown below.
26
DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT
Attribute
Main item
Sub item
Error code
Contents
High 4 bits Low 4 bits
LENS
Lens
Communication
18*0
0000
|
FFFF
Lens communication error.
HARD
VENUS A/D
Flash
28*0
0000
Flash charging capacitor did not been fully charged within 20 seconds.
FLASH ROM
Data Area
2B*0
0001
Flash ROM data reading error is detected when the unit turns ON.
0002
Flash ROM data writing error is detected when the unit turns OFF.
Program Area
0005
Firmware update error.
SYSTEM IC
Initialization
2C*0
0001
Clock IC initialization failure error.
SOFT
CPU
Reset
30*0
0001
|
FFFF
System error (NMI reset).
Recording
Media
SD Memory
Card
31*0
0001
SD memory card logic error.
SD memory card format error.
When it is detected, [MEMORY CARD ERROR FORMAT THIS
CARD?]
is displayed on the screen.
SD memory card format error.
When it is detected, [MEMORY CARD ERROR FORMAT THIS
CARD?]
is displayed on the screen.
0002
SD memory card physical error.
During formatting the SD memory card, there is no response from the
card.
If the mini-SD memory card is used, check the SD memory card
adaptor.
During formatting the SD memory card, there is no response from the
card.
If the mini-SD memory card is used, check the SD memory card
adaptor.
0004
SD memory card writing error.
Check the SD memory card. It might be damage one.
Check the SD memory card. It might be damage one.
CPU
STOP
38*0
0001,
0002
Camera task error.
ASIC hard
0003
AF time out error.
Mirror BOX
Mirror up
3E*0
0001
Mirror up operation error. There is no response from mirror unit.
Mirror down
0002
Mirror down operation error. There is no response from mirror unit.
Camera
System
3B*0
0000
Initialization failure.
System
System
35*0
0001
|
FFFF
System error.
35*1,
35*2
0000
System error (in recording pre-process).
About "*" indication in the above table:
The third digit from the left is different as follows.
−
In case of 0 (example: 18001000)
When the third digit from the left shows "0", this error occurred under the condition of INITIAL SETTINGS has been
completed.
completed.
It means that this error is occurred basically at user side.
−
In case of 8 (example: 18801000)
When the third digit from the left shows "8", this error occurred under the condition of INITIAL SETTINGS has been
released.
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
·
6. How to returned to Normal Display:
Turn the power off and on, to exit from Error code display mode.
NOTE:
The error code can not be initialized.
27
DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT
13 SERVICE FIXTURE & TOOLS
13.1. SERVICE FIXTURE AND TOOLS
The following service fixture and tools are used for checkig and servicing this unit.
13.2. CLEAN BOX
When the part other than described on this service manual is removed, it must be performed at the specified clean environment.
(Less than class 10,000 Federal Standard 209D).
(Less than class 10,000 Federal Standard 209D).
13.2.1. Introduction of Clean box
One of our recommended clean box is as shown below.
It consists of “Air clean unit” and “Clean hood”.
As for the “Air clean unit”, refer to the “Jig Information” on the “Support Information from NWBG/VDBG-PAVC” web-site in “TSN
system”.
system”.
28
DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT
Click on the first or last page to see other DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT service manuals if exist.