Panasonic DMC-GF2CPP / DMC-GF2CEB / DMC-GF2CEC / DMC-GF2CEE / DMC-GF2CEG / DMC-GF2CGC / DMC-GF2CGD / DMC-GF2CGH / DMC-GF2CGK / DMC-GF2CGN / DMC-GF2CGT / DMC-GF2WEB / DMC-GF2WEG / DMC-GF2WGC / DMC-GF2WGD / DMC-GF2WGH / DMC-GF2WGK / DMC-GF2WGN / DMC-GF2WGT Service Manual ▷ View online
9
3 Service Navigation
3.1.
Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2.
Important Notice
*When servicing, it is recommended dealing with Clean box. (Refer to "8.2. Clean Box" section of this service manual for details.)
3.2.1.
Camera Body Unit
3.2.1.1.
About VENUS FHD(IC6001) [Located on the Main P.C.B.]:
• The VENUS FHD (IC6001) mounted on the Main P.C.B. consists of FLASH-ROM chip and VENUS chip, both chips are inte-
grated as one-piece with soldered directly.
• When replacing, always replace in pairs. (Units of service parts: integrated (one pair) state.)
NOTE:
• During servicing, do not press down hard on the surface of IC6001.
Fig. S1
3.2.1.2.
About Mount Box Unit (Ref. 3)
1. This Service Manual does not contain the following repair service information for "MOUNT BOX UNIT"(Ref.3), because it
requires special facilities and equipment.
a. Schematic diagram, Block diagram and P.C.B. layout.
b. Parts list for individual parts.
a. Schematic diagram, Block diagram and P.C.B. layout.
b. Parts list for individual parts.
2. If the "MOUNT BOX UNIT" is confirmed as defective, exchange the "MOUNT BOX UNIT" as a unit (supplied as service parts
size).
3. Before exchanging the "MOUNT BOX UNIT", the performances must be carefully checked, by following the "7.Troubleshoot-
ing Guide" section of this service manual.
Important:
1. After replacing the MOUNT BOX UNIT, the mount box data has to be stored to the unit.
When the serial number of the mount box unit which is put on the shield plate of mount box unit is entered to the adjustment
unit, the applicable data is stored into the MAIN P.C.B..
Refer to the adjustment instruction in the adjustment software for details.
unit, the applicable data is stored into the MAIN P.C.B..
Refer to the adjustment instruction in the adjustment software for details.
Fig. S2
2. The full adjustment must be performed after replacing the "MOUNT BOX UNIT", otherwise picture quality can not be meet
with specification.
10
3.2.1.3.
About Flexible Cable and Connector
Do not touch carelessly so that the foreign body should not adhere to the terminal part of flexible cable and connector.
Wipe off with a clean cloth and the cotton bud, etc. when the terminal part is dirty.
3.2.1.4.
About Main P.C.B. (Ref. 1)
1. This Service Manual does not contain the following repair service information for “MAIN P.C.B.”(Ref.1), because it requires
special facilities and equipment.
a. Schematic diagram, Block diagram and P.C.B. layout.
b. Parts list for individual parts.
a. Schematic diagram, Block diagram and P.C.B. layout.
b. Parts list for individual parts.
2. When a part replacement is required for repairing “MAIN P.C.B.”, replace as an assembled P.C.B. parts.
As for handling the defected P.C.B.s, contact the sales company service depart.
*MAIN P.C.B. (VEP56122A: PP/EE/GC/GD/GH/GK/GN/GT)
*MAIN P.C.B. (VEP56122B: EB/EC/EG)
*MAIN P.C.B. (VEP56122A: PP/EE/GC/GD/GH/GK/GN/GT)
*MAIN P.C.B. (VEP56122B: EB/EC/EG)
Important (About Main P.C.B.):
1. Before exchanging the "MAIN P.C.B.", the performances must be carefully checked, by following the "7.Troubleshooting
Guide" section of this service manual.
2. Before replacing the "MAIN P.C.B.", proceed the EEPROM data backup from the unit. After replacing the MAIN P.C.B., over-
write the EEPROM data with backup data from the unit first, then proceed the adjustment /inspection.
If it is impossible to make a data backup due to the unit does not turns on the power and so on, additional adjustment (using
the light box) is required.
Refer to the adjustment instruction in the adjustment software for details.
If it is impossible to make a data backup due to the unit does not turns on the power and so on, additional adjustment (using
the light box) is required.
Refer to the adjustment instruction in the adjustment software for details.
3. The full adjustment must be performed after replacing the "MAIN P.C.B.", otherwise Picture quality can not be meet with spec-
ification.
11
3.2.2.
Lens Unit (Interchangeable Lens: H-H014)
3.2.2.1.
About Lens MAIN Block unit (Ref. 302)
1. This Service Manual does not contain the repair service information for "LENS MAIN BLOCK UNIT"(Ref.302), because it
requires special facilities and equipment.
2. "LENS MAIN BLOCK UNIT"(Ref.302) performance must be confirmed.
3. In case of the "LENS MAIN BLOCK UNIT"(Ref.302) defect, contact to the service department of sales company.
3. In case of the "LENS MAIN BLOCK UNIT"(Ref.302) defect, contact to the service department of sales company.
Fig. S3
12
3.2.3.
Lens Unit (Interchangeable Lens: H-FS014042)
3.2.3.1.
About Lens Main Block Unit (Ref. 408)
1. This Service Manual does not contain the repair service information for "LENS MAIN BLOCK UNIT"(Ref.408), because it
requires special facilities and equipment.
2. The "LENS MAIN BLOCK UNIT"(Ref.408) performance must be confirmed.
3. In case of the "LENS MAIN BLOCK UNIT"(Ref.408) defect, contact to the service department of sales company.
3. In case of the "LENS MAIN BLOCK UNIT"(Ref.408) defect, contact to the service department of sales company.
Fig. S4
Click on the first or last page to see other DMC-GF2CPP / DMC-GF2CEB / DMC-GF2CEC / DMC-GF2CEE / DMC-GF2CEG / DMC-GF2CGC / DMC-GF2CGD / DMC-GF2CGH / DMC-GF2CGK / DMC-GF2CGN / DMC-GF2CGT / DMC-GF2WEB / DMC-GF2WEG / DMC-GF2WGC / DMC-GF2WGD / DMC-GF2WGH / DMC-GF2WGK / DMC-GF2WGN / DMC-GF2WGT service manuals if exist.