Panasonic DMC-FZ7PP / DMC-FZ7PL / DMC-FZ7EB / DMC-FZ7EE / DMC-FZ7EF / DMC-FZ7EG / DMC-FZ7EGM / DMC-FZ7GC / DMC-FZ7GD / DMC-FZ7GK / DMC-FZ7GN / DMC-FZ7GT / DMC-FZ7SG Service Manual ▷ View online
25
8.3.5.
Removal of the Jack Door Unit
Fig. D7
8.3.6.
Removal of the AF LED/Mic P.C.B.
Fig. D8
8.3.7.
Removal of the Top Operation Unit
Fig. D9
26
8.3.8.
Removal of the CCD Unit
To prevent the CCD unit from catching the dust and dirt, do not
remove the CCD unit except for replacing.
remove the CCD unit except for replacing.
Fig. D10
8.3.9.
Removal of the Flash Unit & EVF
Unit
Unit
Fig. D11
8.3.10.
Removal of the Lens Unit
Fig. D12
NOTE: (When Assembling)
Be sure to confirm the following points when assembling.
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no illegal-
• Assembling conditions are fine. (No distortion, no illegal-
space.)
• No dust and/or dirt on every Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
27
8.4.
Disassembly/Assembly Proce-
dure for the Lens
dure for the Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.3.8.
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.3.8.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
to" Grease apply" in the figure.
When the grease is applied, use a toothpick and apply
thinly.
When the grease is applied, use a toothpick and apply
thinly.
8.4.1.
Removal of the Zoom Motor Unit
8.4.2.
Removal of the 3rd Lens Frame/ 4th
Lens Frame/Drive Frame Unit
Lens Frame/Drive Frame Unit
28
8.4.3.
Removal of the Master Flange Unit
8.4.4.
Removal of the Cam Frame
Click on the first or last page to see other DMC-FZ7PP / DMC-FZ7PL / DMC-FZ7EB / DMC-FZ7EE / DMC-FZ7EF / DMC-FZ7EG / DMC-FZ7EGM / DMC-FZ7GC / DMC-FZ7GD / DMC-FZ7GK / DMC-FZ7GN / DMC-FZ7GT / DMC-FZ7SG service manuals if exist.