Panasonic DMC-FZ7PP / DMC-FZ7PL / DMC-FZ7EB / DMC-FZ7EE / DMC-FZ7EF / DMC-FZ7EG / DMC-FZ7EGM / DMC-FZ7GC / DMC-FZ7GD / DMC-FZ7GK / DMC-FZ7GN / DMC-FZ7GT / DMC-FZ7SG Service Manual ▷ View online
17
6.2.
Confirmation of Firmware Version
The Firmware version can be confirmed by ordering the following steps:.
• Step 1. The temporary cancellation of factory setting:
Set the mode dial to “[ P ]”.
Insert the SD memory card which has a few photo data.
While keep pressing [ Optical Image Stabilizer ] and “[ UP ] of Cross key” simultaneously, then turn the power on.
Insert the SD memory card which has a few photo data.
While keep pressing [ Optical Image Stabilizer ] and “[ UP ] of Cross key” simultaneously, then turn the power on.
• Step 2. Confirm the version:
Set the mode dial to “[ Playback ]” and then press [ DISPLAY ] to switch to LCD with indication. (Fig. A)
Press [ Optical Image Stabilizer ] and “[ DOWN ] of Cross key” simultaneously. (No need to keep pressing.)
(The version information is displayed on the LCD with light blue colour letters.) (Fig. B)
Press [ Optical Image Stabilizer ] and “[ DOWN ] of Cross key” simultaneously. (No need to keep pressing.)
(The version information is displayed on the LCD with light blue colour letters.) (Fig. B)
CAUTION:
The version information does not display if the LCD has switched to LCD with indication already.
In this case, press [ DISPLAY ] to switch to LCD with indication.
In this case, press [ DISPLAY ] to switch to LCD with indication.
<Point>
• The firmware version and EEPROM version can be confirmed with the information (1).
• The information (2), (3) are just reference.
• The information (2), (3) are just reference.
18
7 Service Fixture & Tools
7.1.
Service Fixture and Tools
The following Service Fixture and tools are used for checking and servicing this unit.
19
7.2.
When Replacing the Main PCB
After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
7.3.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
RFKZ0361
FP9001 (MAIN) - CCD UNIT
28PIN 0.5 FFC
2
VFK1440
FP9002 (MAIN) - TOP OPERATION UNIT
10PIN 0.5 FFC
3
VFK1284
FP9003 (MAIN) - LCD UNIT
24PIN 0.5 FFC
4
VFK1443
FP9004 (MAIN) - EVF UNIT
18PIN 0.5 FFC
5
VFK1953
FP9005 (MAIN) - LENS FPC UNIT
40PIN 0.5 FFC
6
VFK1974
FP9006 (MAIN) - LCD UNIT
4PIN 0.5 FFC
7
VFK1576DSC04
P9001 (MAIN) - SPEAKER
2PIN CABLE
8
RFKZ0359
P9003 (MAIN) - FLASH UNIT
2PIN CABLE
9
VFK1576DC202
P9004 (MAIN) - FLASH UNIT
2PIN CABLE
10
VFK1576DC202
P9005 (MAIN) - FLASH UNIT
2PIN CABLE
11
RFKZ0360
P9006 (MAIN) - P9301 (AF LED/MIC)
5PIN CABLE
12
VFK1576DSC04
P9008 (MAIN) - FLASH UNIT
2PIN CABLE
20
CAUTION-1. (When servicing MAIN PCB)
1. Be sure to discharge the capacitor on MAIN PCB.
Refer to “HOW TO DISCHARGE THE CAPACITOR ON MAIN PCB”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on MAIN PCB.
3. DO NOT allow other parts to touch the high voltage circuit on MAIN PCB.
3. DO NOT allow other parts to touch the high voltage circuit on MAIN PCB.
Click on the first or last page to see other DMC-FZ7PP / DMC-FZ7PL / DMC-FZ7EB / DMC-FZ7EE / DMC-FZ7EF / DMC-FZ7EG / DMC-FZ7EGM / DMC-FZ7GC / DMC-FZ7GD / DMC-FZ7GK / DMC-FZ7GN / DMC-FZ7GT / DMC-FZ7SG service manuals if exist.