Panasonic DMC-FS42P / DMC-FS42PC / DMC-FS42PR / DMC-FS42PU / DMC-FS42EB / DMC-FS42EE / DMC-FS42EF / DMC-FS42EG / DMC-FS42EP / DMC-FS42GC / DMC-FS42GJ / DMC-FS42GN Simplified Service Manual ▷ View online
27
8.4.
Disassembly Procedure for the
Lens
Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.6.
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.6.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (RFKZ0472) to the point where is
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (RFKZ0472) to the point where is
shown to “Grease apply“ in the figure.
When the grease is applied, use a toothpick and apply
thinly.
When the grease is applied, use a toothpick and apply
thinly.
6. When repair the drive frame, drive frame and direct
frame, must be unit exchange.
8.4.1.
Removal of the Zoom Motor Unit
and Lens FPC P.C.B. Unit
and Lens FPC P.C.B. Unit
1. Peal the 3 barrier sheets.
2. Remove the 1 solder (A).
3. Remove the 3 locks.
4. Unscrew the 2 screws (A).
5. Remove the zoom motor unit to the indicated by arrow.
6. Remove the 1 solder (B).
7. Unscrew the 1 screw (B).
8. Remove the lens flex to the indicated by arrow.
2. Remove the 1 solder (A).
3. Remove the 3 locks.
4. Unscrew the 2 screws (A).
5. Remove the zoom motor unit to the indicated by arrow.
6. Remove the 1 solder (B).
7. Unscrew the 1 screw (B).
8. Remove the lens flex to the indicated by arrow.
28
8.4.2.
Removal of the Master Flange Unit
8.4.3.
Removal of the 1st Lens Frame/2nd
Lens Frame Move Unit
Lens Frame Move Unit
8.4.4.
Removal of the 2nd Lens Frame
Move Unit
Move Unit
29
8.4.5.
Removal of the Drive/Direct Frame
Unit
Unit
8.5.
Assembly Procedure for the
Lens
Lens
8.5.1.
Phase alignment of the Direct
Frame and Drive Frame Unit
Frame and Drive Frame Unit
8.5.2.
Phase alignment of the Drive/Direct
Frame Unit and Fixed Frame Unit
Frame Unit and Fixed Frame Unit
30
8.5.3.
Assembly for the 1st Lens Frame
Unit and Fixed/Drive/Direct Frame
Unit
Unit and Fixed/Drive/Direct Frame
Unit
8.5.4.
Assembly for the 2nd Lens Frame
Move Unit and Fixed/Drive/Direct
Frame/1st Lens Frame Unit
Move Unit and Fixed/Drive/Direct
Frame/1st Lens Frame Unit
Click on the first or last page to see other DMC-FS42P / DMC-FS42PC / DMC-FS42PR / DMC-FS42PU / DMC-FS42EB / DMC-FS42EE / DMC-FS42EF / DMC-FS42EG / DMC-FS42EP / DMC-FS42GC / DMC-FS42GJ / DMC-FS42GN service manuals if exist.