DOWNLOAD Panasonic DMC-FS42P / DMC-FS42PC / DMC-FS42PR / DMC-FS42PU / DMC-FS42EB / DMC-FS42EE / DMC-FS42EF / DMC-FS42EG / DMC-FS42EP / DMC-FS42GC / DMC-FS42GJ / DMC-FS42GN Service Manual ↓ Size: 4.01 MB | Pages: 65 in PDF or view online for FREE

ORDER NO. DSC0905037AE

B26

Vol.1

Colour
(K)..........Black Type
(S)..........Silver Type (except EF/GJ)
(P)..........Pink Type (except P/PC/EF)

2

PAGE

PAGE

1 SERVICE NAVIGATION ------------------------------------------3

1.1. INTRODUCTION -------------------------------------------3
1.2. Important Notice 1:(Other than U.S.A. and

Canadian Market) ------------------------------------------3

2 INITIAL SETTINGS: -----------------------------------------------4
3 DIAGRAMS ----------------------------------------------------------7

3.1. Overall Block Diagram ------------------------------------7
3.2. CCD Flex Schematic Diagram --------------------------8

4 REPLACEMENT PARTS LIST ---------------------------------9

4.1. Frame & Casing Section ------------------------------- 10
4.2. Packing & Accessories Section (1) ------------------ 11
4.3. Packing & Accessories Section (2) ------------------ 13

3

This Service Manual contains technical information which will help service personnel to understand and service the Digital Camera
Digital Camera; DMC-FS42 series.
The Digital Camera DMC-FS4 series have been developed based on DMC-FS4 series.
Since this Service Manual does not cover the same part which is already described in the Service Manual for DMC-FS4 series,
when servicing, refer to the descriptions in the Service Manual for; DMC-FS4P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GJ/GK/GN,
Order No.DSC0903022CE (Service Manual Vol. 1).

When a part replacement is required for repairing MAIN PCB and/or SUB PCB, replace as an assembled parts.
The following category is/are recycle module part. please send it/them to Central Repair Center.
MAIN PCB : VEP56074D

4

After replacing the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following 
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:

Before proceeding Initial settings, be sure to read the following CAUTIONS.

• Precautions: Read the above “CAUTION 1” and “CAUTION 2”, carefully.
• Preparation:

1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
2. Set the recording mode to the [NORMAL PICTURE] mode.

(Press the [MODE] button and select the [NORMAL PICTURE] by pressing the “[ UP ] and [DOWN] of Cursor buttons”,
 then press the [MENU/SET] button.)
NOTE:

If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.

• Step 1. The temporary cancellation of  “INITIAL SETTINGS”:

Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”.
While keep pressing “[ UP ] of Cursor button” and [ DISPLAY ] button simultaneously, turn the Power on.

• Step 2. The cancellation of  “INITIAL SETTINGS”:

Set the [REC]/[PLAYBACK] selector switch to “[ PLAYBACK ]”.
Press “[ UP ] of Cursor button” and [ DISPLAY ] button simultaneously, then turn the Power off.

• Step 3. Turn the Power on:

Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”, and then turn the Power on.

• Step 4. Display the INITIAL SETTING:

If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.

While keep pressing [ MENU/SET ] and  “[ RIGHT ] of Cursor buttons” simultaneously, turn the Power off.
The “INITIAL SETTINGS” menu is displayed.
There are two kinds of  “INITIAL SETTINGS” menu form as follows: