• Service Manuals |
  • Panasonic |
  • Dv Dsc |
  • DMC-FS3P, DMC-FS3PC, DMC-FS3PL, DMC-FS3PR, DMC-FS3E, DMC-FS3EB, DMC-FS3EE, DMC-FS3EF, DMC-FS3EG, DMC-FS3GC, DMC-FS3GD, DMC-FS3GK, DMC-FS3GN, DMC-FS3GT, DMC-FS3GJ

DOWNLOAD Panasonic DMC-FS3P / DMC-FS3PC / DMC-FS3PL / DMC-FS3PR / DMC-FS3E / DMC-FS3EB / DMC-FS3EE / DMC-FS3EF / DMC-FS3EG / DMC-FS3GC / DMC-FS3GD / DMC-FS3GK / DMC-FS3GN / DMC-FS3GT / DMC-FS3GJ Service Manual ↓ Size: 2.31 MB | Pages: 54 in PDF or view online for FREE

Model
DMC-FS3P DMC-FS3PC DMC-FS3PL DMC-FS3PR DMC-FS3E DMC-FS3EB DMC-FS3EE DMC-FS3EF DMC-FS3EG DMC-FS3GC DMC-FS3GD DMC-FS3GK DMC-FS3GN DMC-FS3GT DMC-FS3GJ
Pages
54
Size
2.31 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / DIGITAL CAMERA
File
dmc-fs3p-dmc-fs3pc-dmc-fs3pl-dmc-fs3pr-dmc-fs3e-dm.pdf
Date
PREV: Panasonic DMC-FS37EB / DMC-FS37EE / DMC-FS37EG / DMC-FS37EP / DMC-FH27P / DMC-FH27PC / DMC-FH27PR / DMC-FH27PU / DMC-FH27GA / DMC-FH27GC / DMC-FH27GF / DMC-FH27GK / DMC-FH27GN Service Manual

Panasonic DMC-FS3P / DMC-FS3PC / DMC-FS3PL / DMC-FS3PR / DMC-FS3E / DMC-FS3EB / DMC-FS3EE / DMC-FS3EF / DMC-FS3EG / DMC-FS3GC / DMC-FS3GD / DMC-FS3GK / DMC-FS3GN / DMC-FS3GT / DMC-FS3GJ Service Manual ▷ View online

29
8.5.3.
Assembly for the 1st Lens Frame
Unit and Fixed/Drive/Direct Frame
Unit
8.5.4.
Assembly for the 2nd Lens Frame
Move Unit and Fixed/Drive/Direct
Frame/1st Lens Frame Unit
30
8.5.5.
Assembly for the Master Flange
Unit and Fixed/Drive/Direct Frame/
1st Lens Frame/2nd Lens Frame
Move Unit
8.6.
Removal of the CCD Unit
To prevent the CCD unit from catching the dust and dirt, do not
remove the CCD unit except for replacing.
31
8.7.
Removal of the Focus Motor
Unit
8.8.
The Applyment of Grease
Method
The grease apply point of lens unit are as follows.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
• Lead screw
- Grease: VFK1850 (Furoyl type)
- Amount of apply: 2 - 4 mg
• Guide pole/Fasten groove of nut
- Grease: RFKZ0472
- Amount of apply: 2 - 4 mg
32
9 Measurements and Adjustments
9.1.
Matrix Chart for Replaced Part and Necessary Adjustment
The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:
After adjustments have been terminated, make sure to achieve “INITIAL SETTINGS”.
*1: This adjustment is necessary, not only replacing CCD unit but also removing it from the lens unit.
NOTE:
*There is no LCD adjustment in this model.
Replaced Part
Adjustment Item
Main P.C.B.
VENUS 
(IC6001)
Flash-ROM 
(IC6002)
Lens Part 
(Excluding 
CCD)
CCD Unit
Camera 
Section
OIS hall element adjustment
(OIS)
O
O
O
O
-
Back focus adjustment
(BF)
O
O
O
O
O
*1
Shutter adjustment
(SHT)
O
O
O
O
O
ISO sensitivity adjustment
(ISO)
O
O
O
O
O
AWB adjustment
High brightness coloration inspection
(WBL)
O
O
O
O
O
CCD white scratch compensation
(WKI)
O
O
O
-
O
*1
CCD black scratch compensation
(BKI)
O
O
O
-
O
*1
Page of 54
Display

Click on the first or last page to see other DMC-FS3P / DMC-FS3PC / DMC-FS3PL / DMC-FS3PR / DMC-FS3E / DMC-FS3EB / DMC-FS3EE / DMC-FS3EF / DMC-FS3EG / DMC-FS3GC / DMC-FS3GD / DMC-FS3GK / DMC-FS3GN / DMC-FS3GT / DMC-FS3GJ service manuals if exist.

RANDOM: