DOWNLOAD Panasonic DMC-FS3P / DMC-FS3PC / DMC-FS3PL / DMC-FS3PR / DMC-FS3E / DMC-FS3EB / DMC-FS3EE / DMC-FS3EF / DMC-FS3EG / DMC-FS3GC / DMC-FS3GD / DMC-FS3GK / DMC-FS3GN / DMC-FS3GT / DMC-FS3GJ Service Manual ↓ Size: 2.31 MB | Pages: 54 in PDF or view online for FREE

Model
DMC-FS3P DMC-FS3PC DMC-FS3PL DMC-FS3PR DMC-FS3E DMC-FS3EB DMC-FS3EE DMC-FS3EF DMC-FS3EG DMC-FS3GC DMC-FS3GD DMC-FS3GK DMC-FS3GN DMC-FS3GT DMC-FS3GJ
Pages
54
Size
2.31 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / DIGITAL CAMERA
File
dmc-fs3p-dmc-fs3pc-dmc-fs3pl-dmc-fs3pr-dmc-fs3e-dm.pdf
Date

Panasonic DMC-FS3P / DMC-FS3PC / DMC-FS3PL / DMC-FS3PR / DMC-FS3E / DMC-FS3EB / DMC-FS3EE / DMC-FS3EF / DMC-FS3EG / DMC-FS3GC / DMC-FS3GD / DMC-FS3GK / DMC-FS3GN / DMC-FS3GT / DMC-FS3GJ Service Manual ▷ View online

25
8.3.9.
Removal of the Battery Case Unit
Fig.D11
8.3.10.
Removal of the Jack Door
Fig.D12
8.3.11.
Removal of the Battery Door Unit
Fig.D13
NOTE: (When Assembling)
Be sure to confirm the following points when assembling.
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no illegal-
space.)
• No dust and/or dirt on every Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
26
8.4.
Disassembly Procedure for the
Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted. 
Disassembling procedures for the CCD unit, refer to item
8.6.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (RFKZ0472/VFK1850) to the point
where is shown to" Grease apply" in the figure.
When the grease is applied, use a toothpick and apply
thinly.
6. When repair the fixed frame, drive frame and direct
frame, must be unit exchange.
8.4.1.
Removal of the Zoom Motor Unit
and Lens Flex P.C.B. Unit
1. Remove the 1 solder (A).
2. Remove the 3 locks.
3. Unscrew the 2 screws (A).
4. Remove the zoom motor unit to the indicated by arrow.
5. Remove the 1 solder (B).
6. Unscrew the 1 screw (B).
7. Remove the lens flex to the indicated by arrow.
27
8.4.2.
Removal of the Master Flange Unit
8.4.3.
Removal of the 1st Lens Frame/2nd
Lens Frame Move Unit
8.4.4.
Removal of the 2nd Lens Frame
Move Unit
28
8.4.5.
Removal of the Drive/Direct Frame
Unit
8.5.
Assembly Procedure for the
Lens
8.5.1.
Phase alignment of the Direct
Frame and Drive Frame Unit
8.5.2.
Phase alignment of the Drive/Direct
Unit and Fixed Frame Unit
Page of 54
Display

Click on the first or last page to see other DMC-FS3P / DMC-FS3PC / DMC-FS3PL / DMC-FS3PR / DMC-FS3E / DMC-FS3EB / DMC-FS3EE / DMC-FS3EF / DMC-FS3EG / DMC-FS3GC / DMC-FS3GD / DMC-FS3GK / DMC-FS3GN / DMC-FS3GT / DMC-FS3GJ service manuals if exist.