Panasonic DMC-FS12P / DMC-FS12PC / DMC-FS12PR / DMC-FS12PU / DMC-FS12EB / DMC-FS12EE / DMC-FS12EG / DMC-FS12EP / DMC-FS12GC / DMC-FS12GJ / DMC-FS12GK / DMC-FS12GN / DMC-FS12GT Simplified Service Manual ▷ View online
9
3.1.5.
Removal of the Drive/Direct Frame
Unit
Unit
3.2.
Assembly Procedure for the
Lens
Lens
3.2.1.
Phase alignment of the Direct
Frame and Drive Frame Unit
Frame and Drive Frame Unit
3.2.2.
Phase alignment of the Drive/Direct
Unit and Fixed Frame Unit
Unit and Fixed Frame Unit
10
3.2.3.
Assembly for the 1st Lens Frame
Unit and Fixed/Drive/Direct Frame
Unit
Unit and Fixed/Drive/Direct Frame
Unit
3.2.4.
Assembly for the 2nd Lens Frame
Move Unit and Fixed/Drive/Direct
Frame/1st Lens Frame Unit
Move Unit and Fixed/Drive/Direct
Frame/1st Lens Frame Unit
11
3.2.5.
Assembly for the Master Flange
Unit and Fixed/Drive/Direct Frame/
1st Lens Frame/2nd Lens Frame
Move Unit
Unit and Fixed/Drive/Direct Frame/
1st Lens Frame/2nd Lens Frame
Move Unit
3.3.
Removal of the CCD Unit
To prevent the CCD unit from catching the dust and dirt,
do not remove the CCD unit except for replacing.
do not remove the CCD unit except for replacing.
12
3.4.
Removal of the Focus Motor
Unit
Unit
3.5.
The Applyment of Grease
Method
Method
The grease apply point of lens unit are as follows.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
• Lead screw
- Grease: VFK1850 (Furoyl type)
- Amount of apply: 2 - 4 mg
- Amount of apply: 2 - 4 mg
• Guide pole/Fasten groove of nut
- Grease: RFKZ0472
- Amount of apply: 2 - 4 mg
- Amount of apply: 2 - 4 mg
Click on the first or last page to see other DMC-FS12P / DMC-FS12PC / DMC-FS12PR / DMC-FS12PU / DMC-FS12EB / DMC-FS12EE / DMC-FS12EG / DMC-FS12EP / DMC-FS12GC / DMC-FS12GJ / DMC-FS12GK / DMC-FS12GN / DMC-FS12GT service manuals if exist.