Panasonic DMC-FP8P / DMC-FP8PC / DMC-FP8PU / DMC-FP8EB / DMC-FP8EE / DMC-FP8EF / DMC-FP8EG / DMC-FP8EP / DMC-FP8GC / DMC-FP8GD / DMC-FP8GH / DMC-FP8GK / DMC-FP8GN / DMC-FP8GT Service Manual ▷ View online
21
7.2.
When Replacing the Main P.C.B.
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
7.3.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
CAUTION-1. (When servicing FLASH P.C.B.)
1. Be sure to discharge the capacitor on FLASH P.C.B..
Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH P.C.B.”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B..
No.
Parts No.
Connection
Form
1
RFKZ0416
FP9001 (MAIN) - CCD UNIT
41PIN 0.3 FFC
2
RFKZ0416
FP9002 (MAIN) - LENS UNIT
41PIN 0.3 FFC
3
RFKZ0549
FP9004 (MAIN) - FP8001 (FLASH)
18PIN 0.5 FFC
4
RFKZ0548
PS9001 (MAIN) - PP9601 (REAR OPE)
20PIN B to B
5
RFKZ0418
PP9002 (MAIN) - PS9501 (TOP OPE)
30PIN B to B
22
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart
8.2.
P.C.B. Location
23
8.3.
Disassembly Procedure
8.3.1.
Removal of the Rear Case Unit
(Fig.D1)
No.
Item
Fig
Removal
1
Rear Case Unit
(Fig.D1)
Card
Battery
2 Screws (A)
Side Ornament (L)
Battery
2 Screws (A)
Side Ornament (L)
(Fig.D2)
Jack Door
2 Screws (B)
5 Hanging Parts
Side Ornament (R)
3 Screws (C)
Bottom Ornament
2 Screws (B)
5 Hanging Parts
Side Ornament (R)
3 Screws (C)
Bottom Ornament
(Fig.D3)
2 Locking tabs
Rear Case Unit
Rear Case Unit
2
LCD Unit
(Fig.D4)
2 Screws (D)
2 Locking tabs
1 Hanging Part
2 Locking tabs
1 Hanging Part
(Fig.D5)
FP9003(Flex)
LCD Unit
LCD Unit
3
Front Case Unit
(Fig.D6)
1 Screw (E)
1 Locking tab
Front Case Unit
1 Locking tab
Front Case Unit
(Fig.D7)
NOTE: (When Installing)
4
Rear OPE P.C.B.
(Fig.D8)
PP9601(Connector)
Rear OPE P.C.B.
Rear OPE P.C.B.
5
Speaker
(Fig.D9)
4 Locking tabs
P.C.B. Spacer
P9001(Connector)
P.C.B. Spacer
P9001(Connector)
(Fig.D10)
Speaker
6
Gyro P.C.B.
(Fig.D11)
1 Screw (F)
FP9701(Flex)
Gyro P.C.B.
FP9701(Flex)
Gyro P.C.B.
7
Top OPE P.C.B.
(Fig.D12)
2 Screws (G)
(Fig.D13)
2 Locking tabs
PS9501(Connector)
2 Locking tabs
2 Convexes
Top Base Unit
Top OPE P.C.B.
PS9501(Connector)
2 Locking tabs
2 Convexes
Top Base Unit
Top OPE P.C.B.
8
Main P.C.B.
(Fig.D14)
FP9001(Flex)
FP9002(Flex)
FP9004(Flex)
3 Screws (H)
Main P.C.B.
FP9002(Flex)
FP9004(Flex)
3 Screws (H)
Main P.C.B.
9
Lens Unit (with CCD)
(Fig.D15)
4 Locking tabs
Lens Plate
Lens Unit
Lens Plate
Lens Unit
10
Flash P.C.B.
(Fig.D16)
1 Screw (I)
1 Locking tab
1 Locking tab
(Fig.D17)
Flash P.C.B.
11
Battery Case Unit
(Fig.D18)
2 Locking tabs
Strap Holder
1 Locking tab
Strap Holder
1 Locking tab
(Fig.D19)
1 Locking tab
Battery Out Spring
Battery Case Unit
Battery Out Spring
Battery Case Unit
12
Battery Door Unit
(Fig.D20)
2 Battery Door Shafts
Battery Door Spring
Battery Door Unit
Battery Door Spring
Battery Door Unit
24
(Fig.D2)
(Fig.D3)
8.3.2.
Removal of the LCD Unit
(Fig.D4)
Click on the first or last page to see other DMC-FP8P / DMC-FP8PC / DMC-FP8PU / DMC-FP8EB / DMC-FP8EE / DMC-FP8EF / DMC-FP8EG / DMC-FP8EP / DMC-FP8GC / DMC-FP8GD / DMC-FP8GH / DMC-FP8GK / DMC-FP8GN / DMC-FP8GT service manuals if exist.